RAID stands for Redundant Array of Independent Disks. It combines multiple physical drives into one logical storage unit, which Seagate calls an array. The RAID level you pick decides how data is spread across the drives and how much protection you get if one of them fails.
How RAID works
A RAID volume is typically presented to the operating system as a single physical drive, according to Intel's Rapid Storage Technology guide. WD says different configurations provide performance, fault tolerance, or both.
Striping spreads data among the disks so they can read and write at the same time, as Apple describes it. Mirroring writes matching data to at least two disks, so if one fails or disconnects, the computer can still reach the data on another. Parity is extra information stored alongside the data, and Seagate says RAID 5 uses distributed parity and can survive one drive failure.
The common RAID levels
- RAID 0: stripes data across at least two drives. Seagate lists the capacity as the drives' combined capacity, and Apple says a striped set treats different-sized disks as having the smallest disk's capacity. Intel says it stores no redundancy information, so a single drive failure loses all data on the volume.
- RAID 1: mirrors data between drives. In Intel's example, two 120 GB drives become one 120 GB volume that stays accessible after one drive fails.
- RAID 5: needs at least three drives and spreads data and parity across them. One drive may fail. Intel gives the capacity as the smallest drive's size multiplied by the number of drives minus one.
- RAID 6: keeps two sets of distributed parity, so up to two drives can fail without data loss, according to Seagate. QNAP's QTS comparison lists 4 to 16 disks, with capacity equal to the total minus two disks.
- RAID 10: stripes mirrored pairs of drives together. One drive in each pair may fail, provided both members of a pair do not fail. Intel's example gives 240 GB from four 120 GB drives.
Seagate warns that if another drive fails before a RAID 5 rebuild completes, the data is lost. Minimum drive counts also vary by product. Seagate's RAID Manager sets minimums of five drives for RAID 5 and seven for RAID 6 on its 8big Pro5, while noting that other devices can use three and four.
Mixed drive sizes cost capacity. In QNAP's QTS, disks of different capacities in a RAID group with failure tolerance operate according to the smallest disk. Synology Hybrid RAID (SHR), Synology's automated RAID management system, divides drive capacity into smaller sections so that space classic RAID would leave unavailable becomes usable. SHR needs at least two drives to tolerate one failure, and SHR-2 needs at least four drives and tolerates two.
Hardware RAID vs software RAID
Intel describes hardware RAID as using a dedicated processor and memory on an expansion card, which takes RAID processing off the host computer. Software RAID is an application running on the host with no extra RAID hardware, and it is often built into the operating system.
Windows 11 and Windows 10 include Storage Spaces, which groups drives into a pool and creates virtual drives with a resiliency type you choose. Microsoft requires at least two drives in addition to the one Windows is installed on, and they can be internal or external hard drives or SSDs connected by USB, SATA, or SAS.
- Simple: built for performance, with no protection from drive failure.
- Two-way mirror: at least two drives, tolerates one failure.
- Three-way mirror: at least five drives, tolerates two failures.
- Parity: at least three drives to survive one failure, at least seven to survive two.
On a Mac, Disk Utility creates disk sets through File > RAID Assistant. Apple documents striped (RAID 0), mirrored (RAID 1), and concatenated (JBOD) sets.
RAID is not a backup
Synology states that RAID, classic and SHR alike, is not a backup solution. QNAP's guidance, dated October 29, 2026, says not to treat RAID redundancy as a backup and calls for backups to a separate destination.
Apple says a mirrored set still needs regular backups. Deleting a file deletes it from the mirror, and software corruption can affect every mirrored copy.
What to check before you set one up
If speed matters and the data is easy to replace, RAID 0 fits, since Apple says striping lets the disks read and write at the same time, but Intel says a single drive failure loses all data on the volume. If you have two drives and want to keep working through a failure, a mirror fits, and in Intel's example two 120 GB drives give a 120 GB volume. If you have four or more drives and want to survive two failures, RAID 6 or SHR-2 is what the makers' documents point to.
Check the minimum drive count for your exact device, and plan around your smallest drive when sizes differ. Whichever level you choose, keep a separate backup.
See What Is a NAS and Do You Need One? and SSD vs HDD, Which Drive Should You Buy?













