To fix Mint Mobile data that isn’t working, enable mobile data, select Mint as your data SIM, reconnect your phone, and check your coverage and account status. If those checks do not restore access, update the carrier settings on iPhone or configure Mint’s APN on Android. Save network resets for after the simpler fixes.
The short version
- Start with settings: Turn on mobile data and make sure your phone uses the Mint line for internet access.
- Check your account: A missed renewal can stop service, while an exhausted high-speed allowance reduces speed.
- Match your phone: Current iPhones use automatic Mint configuration, while Android phones may need Mint’s APN settings.
- Escalate persistent failures: Ask Mint to check outages, account restrictions, and line provisioning when the phone settings do not resolve the problem.
| Fix | When to use it | What to check |
|---|---|---|
| Enable data and select Mint | Data fails across apps | Mobile data and active data SIM |
| Reconnect and check coverage | Weak signal or lost service | Restart and location |
| Check the account | Service stopped or slowed | Renewal and data usage |
| Refresh carrier configuration | Data fails after activation | iPhone carrier update or Android APN |
| Remove data restrictions | One app or background tasks fail | App access and phone usage caps |
| Test network mode and filtering | Basic checks did not help | LTE and VPN settings |
| Check international roaming | Data fails abroad | Active pass and roaming setting |
| Reset network settings | Simpler fixes failed | Device-specific reset |
| Contact Mint | Persistent or account-related failure | Outage, line, and compatibility checks |
Turn on mobile data and select the Mint line
On iPhone, open Settings > Cellular and turn on Cellular Data. For a Mint eSIM, select the Mint line and enable Turn On This Line. On a dual-SIM iPhone, open Settings > Cellular > Cellular Data and select your Mint number.
On Pixel, open Settings > Network & Internet > SIMs and turn on Mobile data. Select Mint and enable Use SIM, then make sure Airplane mode is off under Network & Internet. For dual-SIM Pixels, under Your primary SIMs, select Mobile data and choose Mint.
On Samsung Galaxy phones with these controls, open Settings > Connections > Data usage and enable Mobile data. Next, open Settings > Connections > SIM manager, enable Mint, and select Primary SIM to choose Mint. This also makes Mint the default line for calls and texts, not only data. Galaxy SIM options vary by model and carrier.
To separate a Wi-Fi problem from a cellular problem on Pixel, open Settings > Network & Internet > Internet and turn off Wi-Fi. Check signal strength and retry internet access before moving on.
Reconnect your phone and check coverage
On iPhone, open Settings, turn on Airplane Mode, wait at least 15 seconds, and turn it off. This reconnects the phone when a usable network is available. For a Mint eSIM, you can also switch the line off and back on without deleting the eSIM.
Restart an iPhone X or later by holding the Side button and either Volume button until the power-off slider appears. Drag the slider, wait 30 seconds, then hold the Side button until the Apple logo appears. On iPhone SE models from the second and third generations, hold only the Side button to display the slider.
On Pixel 6 and later, hold Power + Volume Up, then tap Power off. Wait 30 seconds and hold Power to start the phone; older Pixels use Power alone to open the power menu. On Galaxy devices with this Quick panel layout, swipe down from the upper-right corner twice, tap the Power icon, then tap Restart twice.
Open Mint’s coverage page, select Coverage map, and compare your location with the coverage shown. Move outside or away from underground areas and thick walls, then retry. Coverage maps are estimates, not live outage reports, so ask Mint to check local outages if service remains unavailable.
Check your data usage and renewal
Sign in only through Mint Mobile’s own app or website, and never share a code, password, or remote access with someone who contacts you. In the Mint app, inspect the dashboard’s circular usage display, or open your Mint account and check Data Usage. Mint’s usage total can differ from the amount measured by your phone.
On allowance-based plans, Mint says exhausting the high-speed allowance reduces speed rather than disconnecting service. You can use Wi-Fi or wait for the next data recharge.
A missed renewal payment can prevent service. In the Mint app, open My Account, then select Payment > Payment Method to verify your payment details. Next, open My Plan and choose the plan to renew. On the website, check Account > Payment Method, then open Manage Plan to make the renewal payment.
For a new subscription or newly installed SIM, connect to reliable Wi-Fi and complete Mint activation. Make sure the phone is unlocked. If activation fails or the line remains unavailable, contact Mint with the activation error instead of repeatedly changing APN settings.
Refresh the carrier settings or Android APN
Mint says iOS 13 and later have its settings preinstalled. Connect your iPhone to Wi-Fi, open Settings > General > About, and install an offered carrier-settings update.
On Android, after activating Mint and inserting the SIM or installing the eSIM, text SETUP to 6700. Compatible phones receive settings, while other phones receive manual instructions. If data still fails, configure the APN on an Android phone that permits APN editing.
Open Settings > Connections > Mobile Networks > Access Point Names. When the menu differs, search Settings for Access Point Names. Resetting the APN settings returns them to their defaults. Open the three-dot menu, select Reset to default, then select Add.
Enter Mint for Name and Wholesale for APN. Set MMSC to http://wholesale.mmsmvno.com/mms/wapenc and Multimedia Message Port to 8080. Enter default,supl,mms,ia for APN Type.
Set both APN Protocol and APN Roaming Protocol to IPv4/IPv6. Choose GID for MVNO type and enter 756D for MVNO value. Keep the existing MCC and MNC.
Leave Proxy, Port, Username, Password, Server, Multimedia Message Proxy, and Authentication Type blank. Open the three-dot menu, select Save, select the new APN, and restart the phone. If data still fails, continue with the restriction and network checks below.
Remove app restrictions and phone data limits
When only one iPhone app fails away from Wi-Fi, open Settings > Cellular and scroll to the app list. Enable cellular access for the affected app or service, using Show All to reveal additional apps.
If you configured an Android usage cap, turn it off to restore mobile data. On Pixel, open Settings > Network & internet > SIMs > Data warning & limit and turn off Set data limit. On Galaxy, open Settings > Connections > Data usage > Billing cycle and data warning and turn off Set data limit; some versions call it Limit mobile data usage.
For stalled background activity on Pixel running Android 8.0 or later, open Settings > Network & internet > Data Saver and turn off Data Saver. Alternatively, open Unrestricted data and enable the affected app. These settings address background activity, so move on if your phone cannot connect to the cellular network at all.
On Galaxy versions with app network controls, open Settings > Connections > Data usage > Data saver and turn off Turn on now. Under Data usage > Allowed networks for apps, choose the affected app and select Mobile data or Wi-Fi.
Test LTE and temporarily disable filtering
To check whether the problem is specific to 5G on a compatible iPhone, open Settings > Cellular > Cellular Data Options > Voice & Data and select LTE. With Dual SIM, choose the Mint line first. Restore 5G Auto when appropriate.
On Pixel configurations with network-mode selection, open Settings > Network & internet > SIMs, select Mint, then open Preferred network type and try LTE. On Galaxy, open Settings > Connections > Mobile networks > Network mode and try another available mode. Choices depend on your device and carrier configuration; continue with the filtering checks if you do not see these controls.
If your iPhone uses a VPN, firewall, parental-control, or content-filter app, open that app and temporarily disable its filtering features. Restart after making the change, then retry the connection. The exact controls depend on the app; for managed settings, ask your administrator to inspect the enforced VPN and network settings.
On Android devices with these VPN controls, open Settings > Network & internet > VPN, tap the settings icon beside the VPN, and turn it off. Some controls require Android 14 or later. Try this when a VPN may be preventing internet access.
Check your roaming settings when abroad
International data needs an applicable roaming entitlement and the correct phone settings. In the Mint app, open Account > Minternational Pass, then open My Current Passes to check whether the pass is active, expired, or depleted. You can also text GOROAM to 6700 to check its status.
Purchasing a pass alone does not activate it. Activating another pass immediately ends the active one. To activate a stored pass, open Account > Minternational Pass, open My Current Passes, select Activate on the pass, then select Activate Pass.
With an applicable roaming entitlement, open Settings > Cellular > Cellular Data Options on iPhone and enable Data Roaming. Select Mint first when you have multiple lines. On Pixel, open Settings > Network & internet > SIMs, select Mint, and enable Roaming. On Galaxy with this control, open Settings > Connections > Mobile networks and enable Data Roaming Access.
Reset network settings after simpler fixes fail
Resetting iPhone network settings removes saved network settings. Open Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings, then retry cellular access. If a configuration profile or device management controls your network settings, ask your administrator to inspect them separately.
The next step resets your Pixel’s mobile-network settings. Open Settings > System > Reset options > Reset mobile network settings. The separate Reset Bluetooth & Wi-Fi option is not required merely to reset cellular settings.
The next step resets your Galaxy’s mobile-network settings. On Galaxy software with this separate option, open Settings > General management > Reset > Reset mobile network settings. Tap Reset settings, then tap Reset.
Ask Mint to check the line and device compatibility
If data remains unavailable, open Mint’s support chat. Ask Mint to check local outages, account status, your data plan, and whether the device or line is blocked or incorrectly provisioned. Contact support earlier when activation fails or you suspect an account issue.
For a phone brought from another carrier, an imported phone, or a replacement device, open Mint’s Bring Your Own Phone page. Enter the phone’s IMEI and select Check Phone; dial *#06# to obtain the IMEI. On iPhone, inspect Settings > General > About > Carrier Lock, where No SIM restrictions indicates an unlocked phone.
Ask the original carrier to unlock a locked device. If Mint rules out account and network problems and an iPhone hardware fault is suspected, arrange manufacturer service.
Frequently Asked Questions
Why does Mint data stop during a call on my other iPhone SIM?
On a dual-SIM iPhone, open Settings > Cellular > Cellular Data and enable Allow Cellular Data Switching when data stops during a call on the other line. This can use that line’s data allowance and does not work during Data Roaming. Some regions label Cellular Data as Mobile Data.
Can Low Data Mode make background tasks stop on iPhone?
Low Data Mode pauses some background tasks, but it does not disable all internet access. On a 5G-capable iPhone with Data Mode controls, open Settings > Cellular > Cellular Data Options > Data Mode and select Standard, choosing Mint first on a dual-SIM phone.
How can a Mint Family member request more data?
In the Mint app, open My Mint Family, select Add More Data, choose the amount, and tap Submit Request. The Primary Account Holder handles the purchase. Plan changes also go through that account holder.
Can parental controls prevent changes to iPhone cellular data?
Screen Time restrictions can block changes to device settings. On the iPhone, open Settings > Screen Time > Content & Privacy Restrictions, scroll to Privacy Restrictions, and tap Allow Changes to Settings. Set any setting marked Don’t Allow to Allow. On a child’s iPhone in Family Sharing, a parent or guardian must enter the Screen Time passcode to allow the change.











