How to Exit and Close Apps on Apple Watch

Learn how to exit apps on Apple Watch with the Digital Crown, force quit a frozen app, and change when your watch returns to the clock.

Contents

Don't Miss the Good Stuff

Get tech news that matters delivered to your inbox.

Press the Digital Crown once to exit an app on Apple Watch and show the Home Screen, then press it again to reach the watch face. To force quit an unresponsive app, hold the side button until the sliders appear, release it, then hold the Digital Crown until the watch face appears.

The steps below use watchOS 27 menus unless another version is specified. Leaving an app, force quitting it, ending an activity, and uninstalling the app are separate actions, so choose the one that matches what you want to stop.

The short version

  • Leave an app: Press the Digital Crown once for the Home Screen and again for the watch face.
  • Quit a frozen app: Hold the side button until the sliders appear, release it, then hold the Digital Crown until the watch face appears.
  • Keep the clock visible: Adjust Return to Clock to control how soon the watch leaves an inactive app.
  • Stop an activity: Use the app’s own session controls to end a workout, route, recording, or playback.

Your goalMethodWhat it does
Leave the current appPress the Digital CrownShows the Home Screen
Force quit a frozen appHold the side button, release it at the sliders, then hold the Digital CrownQuits the affected app
Dismiss the foreground appCover the display with your handMoves the app into the background
Return with a wrist gestureUse Wrist Flick on a compatible watchReturns to the watch face
Set the general return intervalAdjust Return to Clock on the watchChanges when an inactive app leaves the screen
Set an individual return intervalSelect an app and tap CustomOverrides the general return interval
Adjust return behavior from iPhoneOpen Return to Clock in the Apple Watch appChanges general or individual app behavior
Keep an ongoing app from returning onscreenTurn off Return to App where availableChanges presentation without stopping the activity
Exit with accessibility gesturesSelect Press Crown through AssistiveTouchPerforms the Digital Crown navigation action
Exit from your iPhoneUse Apple Watch Mirroring on a supported modelLets you tap the mirrored Digital Crown
Switch away using SiriAsk Siri to open SettingsLeaves the previous app’s interface
Leave a Live ActivityPress the Digital CrownReturns to the watch face
Reduce background updatesAdjust Background App RefreshControls updates without closing apps
Fix a persistent app problemRestart Apple WatchRestarts the whole watch
Restart when normal shutdown failsHold the side button and Digital Crown togetherForce restarts an unresponsive watch
Remove an app directlyUse the app’s Delete button on the watchUninstalls a removable watch app
Remove a companion watch appTurn off Show App on Apple Watch on iPhoneUninstalls the watch app
Remove a watch-only app from iPhoneTap Delete app on Apple WatchUninstalls the selected watch-only app
Remove corresponding apps from both devicesDelete the iPhone appAlso deletes its corresponding watch app
Remove an app from a managed watchHave an administrator use device managementRemoves the targeted managed watch app

Leave the current app

While the app is onscreen, press the Digital Crown once. The Home Screen appears, where you can choose another app, or you can press the Digital Crown again to show the watch face. This leaves the app’s interface without performing a force quit.

To end an ongoing activity, use the app’s own controls: for example, end a workout, end a route in Maps, stop a podcast, or cancel a timer. Returning to the watch face is a separate action, so use those controls when your goal is to stop the session itself.

Force quit an unresponsive app

Keep the affected app displayed, then hold the side button until the sliders appear. Release the side button, then hold the Digital Crown until the watch face appears. Open the app again if you need to continue using it.

Use this sequence when you need to force quit an unresponsive app on watchOS 27. If the app problem persists after reopening it, restart the watch using the steps below.

Return to the watch face with a gesture

On Apple Watch Series 9 and later, Apple Watch Ultra 2 and later, and Apple Watch SE 3 running watchOS 26 or 27, quickly turn your watch-wearing wrist away from you and back. Wrist Flick dismisses the current presentation and returns to the watch face without force quitting the app. It is enabled by default, and you can manage it under Settings > Gestures > Wrist Flick.

Covering the display with your hand also dismisses the foreground app and moves it into the background without force quitting it. That differs from holding your palm on the display for three seconds to mute an Apple Watch alert. For a watch outside the supported Wrist Flick models, use the Digital Crown to leave the app.

Choose when apps return to the clock

On your watch, open Settings > General > Return to Clock. Choose Always, After 2 minutes, or After 1 hour. Select Always for the earliest return when the app becomes inactive.

To give one app a different interval, select it under Return to Clock, tap Custom, then choose Always, After 2 minutes, or After 1 hour. This lets you adjust that app separately from the general setting. The setting controls what stays onscreen rather than terminating the app.

You can also make these changes from the paired iPhone. Open the Apple Watch app, select My Watch, then open General > Return to Clock. Adjust the general return setting or select an app to change its individual behavior.

Stop an ongoing app from returning onscreen

For supported session apps, open Settings > General > Return to Clock, select the app, and turn off Return to App where available. Supported apps include Audiobooks, Maps, Mindfulness, Music, Now Playing, Podcasts, Stopwatch, Timers, Voice Memos, and Workout. Turning off this setting changes whether the app resumes onscreen; use the app’s session controls if you also want to stop the activity.

While viewing a Live Activity on watchOS 27, press the Digital Crown to return to the watch face. To adjust presentation preferences, open Settings > Smart Stack > Live Activities. Dismissing the presentation does not necessarily end its workout, timer, or media session.

Exit with AssistiveTouch or your iPhone

You can use AssistiveTouch to perform the Digital Crown action on Series 4 and later, SE models, and Ultra models running a compatible watchOS release. On the watch, open Settings > Accessibility > AssistiveTouch, enable AssistiveTouch, and tap OK. Then enable Hand Gestures.

With AssistiveTouch active, double-clench to display the Action Menu. Use the forward and back gestures to select Press Crown, then clench to activate it. Repeat that action if necessary to reach the watch face.

On models supporting mirroring, open Settings > Accessibility > Apple Watch Mirroring on the paired iPhone and turn on Apple Watch Mirroring. Tap the Digital Crown shown beside the mirrored watch display to leave the app, then tap it again to reach the watch face. Apple Watch SE does not support mirroring; use the watch’s Digital Crown or compatible AssistiveTouch gestures instead.

Restart the watch if the app still fails

If force quitting does not resolve the app problem, disconnect the watch from its charger before restarting it. Hold the side button until the sliders appear, tap the Power button, then drag Power Off to the right. These are also the steps to turn off your Apple Watch when you want to leave it powered down.

After shutdown, hold the side button until the Apple logo appears to turn it back on. If you cannot restart normally, hold the side button and Digital Crown together for at least 10 seconds, until the Apple logo appears. When choosing how to restart or force restart Apple Watch, reserve the force restart for a watch you cannot restart normally.

Remove an app you no longer want

Deleting an app removes it from your watch. To remove it directly, press the Digital Crown, then swipe up to display all apps. Hold the display until the icons jiggle, tap the app’s Delete button, then tap Delete App. Only removable apps show the Delete button; if it is missing, leave the app with the Digital Crown instead.

Turning off a companion app’s watch switch uninstalls that app from your watch. On the paired iPhone, open Watch, select My Watch, then open Apps. Select the app and turn off Show App on Apple Watch. Use this route for apps that show that switch.

Deleting a watch-only app through your iPhone removes it from the watch. Open Watch on iPhone, select My Watch, then open Apps and select the watch-only app. Tap Delete app on Apple Watch, then tap Delete.

Deleting a corresponding iPhone app removes both the iPhone app and its Apple Watch app. For a removable iPhone app, touch and hold it on iPhone, tap Remove App, then tap Delete App. If a final confirmation appears, tap Delete.

On a supervised, managed Apple Watch running watchOS 10 or later and enrolled through a supervised, managed iPhone running iOS 17 or later, administrator removal uninstalls the targeted watch app. Your administrator uses the organization’s device-management service to send an app-removal command targeting the watch app’s bundle ID. Paired or dependent apps require separate removal on each device, and the management service determines the console steps.

Frequently Asked Questions

Does routinely closing Apple Watch apps save battery power?

Apple says routine quitting does not save battery power. Force quit an app when it becomes unresponsive rather than treating quitting as a battery-saving habit.

How can you reduce background app updates instead?

On Apple Watch, open Settings > General > Background App Refresh. Turn off Background App Refresh globally or turn off individual app switches. Apps providing complications on the current watch face can still refresh.

Can Siri help you leave an Apple Watch app?

With Siri enabled, activate Siri and say Open Settings. That opens Settings, switching away from the previous app’s interface without force quitting it.

Can you set up AssistiveTouch from the paired iPhone?

Yes, open the Watch app and select My Watch. Then open Accessibility > AssistiveTouch to access its setup.

Can you control the mirrored watch using iPhone accessibility features?

Yes, Apple Watch Mirroring supports iPhone accessibility inputs such as Voice Control and Switch Control. This applies to watches that support mirroring and their paired iPhones.

Share