Technobezz is supported by its audience. We may get a commission from retail offers.
7 Best Mini ITX Cases in 2026
The Cooler Master NR200P V3 leads our 7 best Mini-ITX cases in 2026, with picks for compact builds, ATX power supplies, custom loops, portability and design.
A Mini-ITX case sets the limits for the rest of a small build: how long the graphics card can be, how tall the CPU cooler can be, and which power supply fits. This page is for builders planning a small-form-factor PC who want those limits clear before ordering parts.
The Cooler Master NR200P V3 is the best overall pick. It supports a vertically mounted graphics card up to 361.5mm long, comes bundled with a PCIe 5.0 riser cable, and is ready for top-mounted 240mm or 280mm radiators.
The other six picks follow clear use cases: compact premium, ATX power supplies and custom loops, a Mini-ITX tower for 360mm radiators, portability, value, and design. If you have room for something larger, see our best PC cases.
The Cooler Master NR200P V3 is a Mini-ITX case that accepts Mini-ITX motherboards only. It is designed for a vertically mounted graphics card up to 361.5mm long, and a PCIe 5.0 riser cable is bundled. Cooler Master names the RTX 5090 and RX 9070 XT among the cards it supports.
The top of the case is ready for 240mm or 280mm radiators, and Cooler Master recommends 400mm tubing for clean front routing. The aluminum and mesh side panels come off without tools, and the vented mesh side panel is removable. The power supply bay takes only SFX units up to 130mm long.
Stated radiator support is 240mm or 280mm, top-mounted
Cooler Master does not list front panel ports for this model
Cooler Master does not list a maximum CPU air cooler height for this model
Who it is for: Builders who want a Mini-ITX case with a vertical GPU mount for cards up to 361.5mm, a bundled PCIe 5.0 riser cable and a top radiator mount.
Skip if
You plan to use an ATX power supply, since this case takes only SFX units. The SSUPD Meshroom S V2 supports ATX power supplies up to 170mm in length.
The Lian Li A4-H2OX5 is an 11-liter Mini-ITX case that supports a triple-slot graphics card and 240mm AIO water cooling. It uses a sandwich layout, with the graphics card mounted behind the motherboard on a PCIe Gen 5 riser cable. The case is an update to the DAN A4-SFX with added water cooling support, made in collaboration with Daniel Hansen of Dan Cases.
The exterior is aluminum and the interior is SPCC steel, with mesh panels on the bottom, sides and top. The included riser cable is 240mm long and also supports PCIe 2.0 to 4.0 devices. A removable bracket holds SFX and SFX-L power supplies, and the case comes with a pre-routed power cord extension. The case measures 12.83 inches long, 5.51 inches wide and 9.61 inches high, and weighs 7.56 pounds.
12.83 x 5.51 x 9.61 inches (length x width x height)
Triple-slot GPU support in a sandwich layout
240mm AIO support
240mm long PCIe Gen 5 riser cable included
SFX and SFX-L power supply support
Pros
Triple-slot GPU and 240mm AIO support in 11 liters
PCIe Gen 5 riser cable included
Mesh panels on the bottom, sides and top
Aluminum exterior with SPCC steel interior
Cons
It has a 1-year warranty
Stated AIO support is 240mm
Lian Li does not list a maximum GPU length for this model
Lian Li does not list front panel ports for this model
Who it is for: Builders who want an 11-liter case that takes a triple-slot graphics card and a 240mm AIO.
Skip if
You need a stated GPU length figure before buying. The Cooler Master NR200P V3 states support for cards up to 361.5mm, and the Thermaltake TR100 states 360mm of GPU clearance.
The SSUPD Meshroom S V2 is a 15L case with an adjustable internal motherboard tray that supports ITX, Micro-ATX and ATX motherboards. Micro-ATX and ATX setups require an extra-length PCIe riser cable. The power supply mount takes SFX, SFX-L or ATX units up to 170mm in length.
The front mounting bracket accepts a 240mm or 280mm AIO, and the case supports dual-radiator custom loop designs and a DDC pump. CPU cooler height tops out at 74mm. It is 4-slot ready for graphics cards up to 152mm wide, and with the optional 30 to 50mm aluminum feet it fits cards up to 353mm long. The mesh panels cover all sides, the external panels are tool-less, and the body is powder coated SGCC steel. A PCIe 5.0 riser cable is included, and the front panel has one USB Type-C port, one USB 3.0 Type-A port (5 Gbps) and a power button.
The Thermaltake Tower 250 is a Mini-ITX mini tower with a dual chamber layout. It supports radiators up to 360mm, and graphics cards up to 360mm in length with the power cover removed.
Two 120mm CT fans come installed on the top of the chassis as exhaust, and the case can hold up to 8 x 120mm fans or 5 x 140mm fans. It supports both SFX and ATX power supplies, and an SFX bracket is preinstalled. The outer panels use magnets and push clips for tool-free removal, and the dust filters can be removed for cleaning. This version comes in the Mint Strawberry color.
GPU support up to 360mm with the power cover removed
2 x 120mm CT fans installed on top
Room for up to 8 x 120mm or 5 x 140mm fans
SFX and ATX power supply support, SFX bracket preinstalled
Pros
Supports radiators up to 360mm
Two 120mm fans included
Works with SFX or ATX power supplies
Tool-free outer panels and removable dust filters
3-year manufacturer warranty
Cons
The 360mm GPU support applies with the power cover removed
Two 120mm fans are included, so filling the other fan positions means buying more
Thermaltake does not list front panel ports for this model
Thermaltake does not list a volume in liters for this model
Who it is for: Builders who want a Mini-ITX tower with radiator support up to 360mm, two fans installed and a choice of SFX or ATX power supply.
Skip if
You want a case with a stated volume in liters. The Lian Li A4-H2OX5 is 11 liters, the SSUPD Meshroom S V2 is 15L and the Thermaltake TR100 is 18.9 liters.
The Thermaltake TR100 is an 18.9-liter Mini-ITX case with a dual chamber design. Thermaltake built it to be portable and compact, for use at home or for travel.
It offers 360mm of GPU clearance, 280mm radiator support, SFX and SFX-L power supply support and 68mm of CPU cooler clearance. A PCIe 4.0 riser cable is included. The PCIe bracket is removable for GPU installation, and a GPU brace is integrated. This version comes in Matcha Green.
The JONSBO C6-ITX is a compact desktop case for ITX and Mini-DTX motherboards. It has mesh on all sides and an adjustable carry handle on top, held by a Velcro fastener. It measures 202mm wide, 266mm deep and 295.2mm high, including the foot pads.
It works with ATX or SFX power supplies with a 140mm length limit, graphics cards under 255mm and CPU coolers with a 170mm height limit. There are 4 expansion slots and one drive bay for a 3.5-inch HDD or a 2.5-inch SSD. The top cover opens without tools, and the front panel has a Type-C port, one USB 3.0 port and a combined audio and mic jack. The body uses 0.7mm steel plate.
The JONSBO TK-0 is an ITX mini tower made from aluminum alloy, steel and 16mm wood veneer, with walnut wood and a dual-curved glass side view. It can be placed horizontally or vertically on a desk.
A separated two-compartment structure is used for managing cables and hardware, and the aluminum PCI cover is removable for taking out the graphics card. Hardware support is given as an ITX motherboard, a 160mm SFX power supply, a 230mm GPU and a CPU cooler height of 137mm. Optional fan positions are one 120mm or 140mm at the top, one 120mm or 140mm at the bottom and two 90mm at the rear.
ITX motherboard and 160mm SFX power supply support
GPU support: 230mm
CPU cooler height: 137mm
Drive bay: 3.5-inch HDD x 1 / 2.5-inch SSD x 1
Pros
Walnut wood, aluminum alloy and curved glass in one case
Can be placed horizontally or vertically
Removable aluminum PCI cover
2-year manufacturer warranty
Cons
GPU support is 230mm
CPU cooler height is 137mm
JONSBO does not list radiator support for this model
JONSBO does not list front panel ports for this model
Who it is for: Builders who put materials first and want an ITX case in aluminum alloy, wood veneer and glass for a graphics card within 230mm.
Skip if
Your graphics card is longer than 230mm. The Cooler Master NR200P V3 supports cards up to 361.5mm.
How to Choose
Start with the graphics card. Measure your card's length and thickness, then compare both with the GPU support the case states. Among these picks, the stated GPU figures run from 230mm on the JONSBO TK-0 to 361.5mm on the Cooler Master NR200P V3.
Match the power supply. Check which form factors the case takes and the maximum length. The Cooler Master NR200P V3 takes only SFX units up to 130mm. The SSUPD Meshroom S V2 takes SFX, SFX-L or ATX units up to 170mm.
Pick the cooling plan first. For air cooling, check the CPU cooler height figure. For liquid cooling, check the radiator size and where it mounts. The Thermaltake Tower 250 supports radiators up to 360mm. The JONSBO C6-ITX has a 170mm CPU cooler height limit.
Check the riser cable. If a case uses a riser cable for the graphics card, look at which PCIe version comes in the box. The Thermaltake TR100 includes a PCIe 4.0 riser cable. The Cooler Master NR200P V3 bundles a PCIe 5.0 riser cable.
Confirm motherboard support. Make sure the case and the board size agree before you order. If you are still choosing a board, see our best gaming motherboards and confirm the model you pick is Mini-ITX.
Think about where the case will sit. Compare the stated dimensions with your desk or shelf, and look for a carry handle if you move the PC often. The JONSBO C6-ITX has an adjustable carry handle on top.
FAQ
Can a Mini-ITX case fit a long graphics card?
It depends on the GPU support each case states. The Cooler Master NR200P V3 supports cards up to 361.5mm. The Thermaltake Tower 250 supports cards up to 360mm with the power cover removed. The Thermaltake TR100 has 360mm of GPU clearance. The SSUPD Meshroom S V2 fits cards up to 353mm with its optional 30 to 50mm aluminum feet. Check your card's length against these figures before buying.
Do I need an SFX power supply for a Mini-ITX case?
Not always. The Cooler Master NR200P V3 takes only SFX units up to 130mm. The SSUPD Meshroom S V2 takes SFX, SFX-L or ATX units up to 170mm. The Thermaltake Tower 250 supports both SFX and ATX power supplies. The JONSBO C6-ITX works with ATX or SFX units with a 140mm length limit. Check the form factor and the length figure for the case you choose.
Which of these cases include a PCIe riser cable?
The Cooler Master NR200P V3 is bundled with a PCIe 5.0 riser cable. The Lian Li A4-H2OX5 includes a 240mm long PCIe Gen 5 riser cable. The SSUPD Meshroom S V2 comes with a PCIe 5.0 riser cable. The Thermaltake TR100 includes a PCIe 4.0 riser cable. The Thermaltake Tower 250, JONSBO C6-ITX and JONSBO TK-0 do not list a riser cable.
Can I use liquid cooling in a Mini-ITX case?
Check the radiator support for the case. The Thermaltake Tower 250 supports radiators up to 360mm. The Cooler Master NR200P V3 is ready for top-mounted 240mm or 280mm radiators. The SSUPD Meshroom S V2 takes a 240mm or 280mm AIO on its front mounting bracket and supports dual-radiator custom loops. The Thermaltake TR100 has 280mm radiator support. The Lian Li A4-H2OX5 accommodates 240mm AIO water cooling. The JONSBO C6-ITX and JONSBO TK-0 do not list radiator support.
Which of these cases is made to be carried?
The JONSBO C6-ITX has an adjustable carry handle on top. Thermaltake built the TR100 to be portable and compact, for home or travel. The other picks do not list a carry handle or travel use.
Published November 18, 2026 Last updated November 18, 2026