Aeotec Adds Nine Certified Devices to Works with Home Assistant

Aeotec has joined Works with Home Assistant with nine certified devices. Five support Z-Wave Long Range, but using their extra reach requires a compatible adapter, such as the Home Assistant Connect…

Technobezz
Aeotec Adds Nine Certified Devices to Works with Home AssistantImage: Home Assistant

Don't Miss the Good Stuff

Get tech news that matters delivered to your inbox.

Aeotec has joined Works with Home Assistant with nine certified devices, bringing tested local control and a commitment to continued support for its smart home hardware. Five of the devices support Z-Wave Long Range, which Home Assistant says can reach up to 1 km under line-of-sight conditions.

Aeotec’s Z-Wave Long Range devices are currently available in the US and EU, and using that capability requires a compatible adapter such as the Home Assistant Connect ZWA-2. Older adapters can still connect the devices through standard Z-Wave, but buyers will not get the additional range.

Read more: Home Assistant 2026.11 Adds Clearer Names and Child Devices

The certified selection covers sensors, switches, sirens and an upgrade for smoke detectors, with named products including Door Window Sensor 8, Water Sensor 8 and MultiSensor 8. Home Assistant says its team checked every certified device against requirements for privacy and local operation, while Aeotec committed to ongoing support and firmware updates. Certification also requires devices to retain their expected functionality within Home Assistant over the long term without depending on a cloud service.

Aeotec’s 8 series and SmokeShield use Z-Wave Long Range, which connects each device straight to the adapter instead of passing signals through a mesh. Home Assistant puts standard Z-Wave’s range at around 300 m and its network capacity at 232 devices, compared with up to 4,000 devices for Z-Wave Long Range. It also says those direct connections improve sensor responsiveness and reduce battery demands.

The Z-Wave devices in the group operate locally using Home Assistant’s Z-Wave integration, with Z-Wave JS providing the driver. For setup, SmartStart lets owners scan a device’s QR code to join the network, while S2 encrypts its communications. All five Long Range devices in the newly certified group also carry certification from the Z-Wave Alliance.

Home Assistant tested the Z-Wave hardware using Home Assistant Container on an Intel NUC, paired with the Home Assistant Connect ZWA-2. The group also includes a Zigbee device, tested using the Home Assistant Connect ZBT-2 and the Zigbee Home Automation integration. Devices outside the certification program may still work with Home Assistant, according to its guidance.

Aeotec follows Everything Smart Home, which joined the program in October with its ESPHome-based Everything Presence Lite, One and Pro sensors. LEDVANCE also joined in October, adding 116 certified devices.

Share