How to Update Your Touchpad Driver in Windows

Start your touchpad driver update in Windows Update, then check optional drivers or install the matching package from your laptop maker.

Contents

Don't Miss the Good Stuff

Get tech news that matters delivered to your inbox.

Update your touchpad driver through Windows Update, then check optional driver updates or install the matching package from your laptop manufacturer. Windows automatically installs recommended drivers, but optional drivers require you to select them. The Settings steps below use Windows 11 menus.

The short version

  • Start with Windows Update: Check for updates and install an applicable touchpad driver when one is offered.
  • Check optional drivers: Optional driver updates are not installed automatically.
  • Match your laptop: Use a manufacturer package that matches your hardware and Windows version.
  • Repair only when needed: Reinstalling can address a faulty driver, while rolling back restores a previous version after a problematic update.

MethodWhen to use itMain limitation
Windows UpdateFirst check for a recommended driverA compatible package must be available
Optional updatesCheck additional driver packagesYou must select the applicable driver
Device Manager automatic searchRequest an update for the touchpadCheck Windows Update separately if nothing is found
Manufacturer update applicationGet updates for a supported laptop modelApplication support varies by model
Manufacturer installerInstall a matching downloaded packageFollow its package-specific instructions
Device Manager manual installationInstall extracted driver filesHardware, Windows version, and architecture must match
Reinstall the deviceRepair a faulty driver installationDoes not guarantee a newer driver
Roll back the driverReverse a problematic driver updateRequires administrator permissions and a retained previous driver

Check Windows Update first

On Windows 11, open Start > Settings > Windows Update, then select Check for updates. Install the available updates and restart when requested. This can install a recommended touchpad driver when a compatible package is available through Windows Update.

If the update check does not provide a touchpad package, continue to optional updates. You should also check Windows Update separately if you started with Device Manager and its automatic search found nothing.

Look for an optional touchpad driver

On Windows 11, open Settings > Windows Update > Advanced options > Optional updates. Expand Driver updates when that category is available, then select the applicable touchpad package. Choose Download and install, and restart afterward.

The package name and checkbox wording vary with the device and driver release. Optional drivers are not installed automatically, so you need to select the applicable package yourself. If the category is missing or contains no applicable touchpad driver, continue with Device Manager or your manufacturer's update application.

Search for the driver in Device Manager

Right-click Start and select Device Manager. Locate your touchpad under Human Interface Devices or Mice and other pointing devices. If you do not find it in the first category, check the other.

Right-click the touchpad, select Update driver, then choose the option to Search automatically for drivers. Follow the update prompts and restart if requested. If the search finds nothing, check Windows Update separately or continue to your laptop manufacturer's update route.

Microsoft also documents Device Manager driver updates for Windows 10. General Windows 10 support ended on October 14, 2025, and the availability of an existing driver does not establish ongoing support for your laptop model.

Use your laptop manufacturer's update application

The application you need depends on your laptop brand and model. Follow the route for your supported device and select the applicable touchpad update. If your model is outside the application's support or no applicable update appears, check Windows Update or look for a compatible standalone package from the manufacturer.

On a supported Dell or Alienware laptop, open SupportAssist and go to Home. Select Update software > Start, complete installation of the applicable updates, and restart if requested. Dell recommends moving from the retired Dell Update and Alienware Update applications to SupportAssist.

For a supported HP PC, open HP Support Assistant, then select My Dashboard. Locate your computer and select Updates. After the analysis finishes, choose the applicable updates and complete their download and installation.

On a supported Lenovo laptop, open Lenovo Vantage > System Update > Check for Updates, then install the applicable updates. Some model-specific interfaces place System Update under Device. Lenovo documents this application route for both Windows 11 and Windows 10.

For a supported ASUS notebook, open MyASUS and select System Update. Choose the applicable touchpad package, then select Update selected items. Only packages newer than your installed versions are listed, and completed installations appear under Update History.

On a supported Surface, connect the Surface keyboard or Type Cover if applicable, then open the Surface app. Expand Help & support and select Check for updates. Install updates through the Windows Update page that opens; new driver availability depends on your model's servicing lifecycle.

Download the package for your exact model

If your manufacturer offers a compatible standalone package, identify your exact laptop model and Windows version on its support site. Download the matching touchpad package, extract it if necessary, and run its installer. Follow that package's instructions and restart afterward, since installer labels and agreements differ between packages.

For Dell or Alienware, open Dell Drivers & Downloads. Enter the Service Tag or model, or select Browse all products, to reach the model-specific downloads. Choose a matching touchpad package and follow its installation instructions.

For Acer, open Acer Drivers and Manuals and identify your laptop by serial number or model. Open Drivers, choose Operating System, and download the matching touchpad package, selecting the correct hardware vendor if multiple packages appear. Extract the download and run Setup. Select Yes if Windows requests elevation, then complete the installer.

For an ASUS model offering a touchpad package, find your exact model on ASUS Support. Open Driver & Utility > Driver & Tools and choose the operating system. Where offered, locate ASUS Precision TouchPad driver under Pointing Device, download the model-compatible package, install it, and restart.

For Surface, open Microsoft's Surface driver and firmware download selector. Under Manually update Surface drivers and firmware, choose your device family and exact model, then follow the linked download page to obtain and install the compatible bundle. Keep your Surface connected to power during installation. The bundle may include more than the touchpad driver.

Install extracted files through Device Manager

On Windows 11, you can install a downloaded package containing driver files through Device Manager. First obtain and extract the manufacturer package that matches your hardware, Windows version, and processor architecture. Follow any installation instructions supplied with that package.

In Device Manager, right-click your touchpad and select Update driver. Choose Browse my computer for drivers, then select Browse... and choose the extracted folder. Select OK, then Next, and finish the installation.

Reinstall a faulty touchpad driver

On Windows 11, reinstalling is a repair option when your driver is faulty, and it does not guarantee a newer version. Save your work before starting. Windows attempts to reinstall the driver after you restart your computer.

Uninstalling removes your touchpad device's current driver installation. In Device Manager, right-click the touchpad and select Uninstall device, then select Uninstall. Next, restart your computer so Windows can attempt the reinstallation.

If the driver still needs attention afterward, run Windows Update or install the compatible manufacturer package. To check whether input is enabled, search Windows for Touchpad settings and set Touchpad to On. That setting enables touchpad input; it does not install a driver update.

Roll back an update that causes problems

On Windows 11, you can roll back a problematic driver update if you have administrator permissions and a retained previous driver. If those requirements are not met, use the compatible manufacturer package or the reinstallation route instead.

Rolling back replaces the updated driver with the retained previous version. In Device Manager, open your touchpad's Properties, select the Driver tab, then choose Roll Back Driver. Choose the applicable reason, select Yes, and restart if requested.

Frequently Asked Questions

Should you download a generic Synaptics touchpad driver?

Use your notebook manufacturer's supported driver for a Synaptics touchpad. Synaptics directs you to manufacturer-customized packages rather than a universal consumer touchpad update.

Can a touchpad function key update the driver?

A touchpad hotkey enables or disables input; it does not update software. On supported ASUS models, the key is commonly F6 or F9, but its behavior depends on your model.

Does HP Support Assistant work on Windows S mode or ARM PCs?

HP excludes Windows S mode and ARM devices from HP Support Assistant support. If your HP laptop has a published driver package, identify your laptop and its supported Windows version in HP Software and Driver Downloads to find the applicable driver.

How do you update the touchpad driver on a Samsung laptop?

On a supported Samsung PC, open Start, then Samsung Update, and let the application detect your model or enter the model and choose its Windows version. Select the applicable driver and choose Download; the selected update installs automatically. If Samsung Update does not support your model, Samsung directs you to Windows Update.

Which MSI application should you use for driver updates?

Use MSI Center, MSI Center Pro, or MSI Dragon Center as supported by your specific notebook model. In that application, select Support, then Live Update, then Scan. Choose the applicable driver and select Download; if installation is not automatic, run the installer from the extracted folder. Restart afterward.

Can you choose a Microsoft Update Catalog driver just because it is newer?

A newer date alone is insufficient to select a compatible package. Check that the hardware, processor architecture, and Windows compatibility match your laptop before selecting Download. For this advanced route, search the Catalog using your touchpad's hardware ID or exact model, save the matching package, and extract its driver files if necessary. You can then install those files through Device Manager.

Share