How to Fix a Phone That Will Not Charge With Any Charger

Why is my phone not charging with any charger? Check the cable, outlet and port, allow time for a drained battery, then try your phone's restart.

Contents

Don't Miss the Good Stuff

Get tech news that matters delivered to your inbox.

To fix a phone that will not charge with any charger, test a compatible cable and adapter on another device, check the outlet and charging port, then give a drained battery time to recover. Use the charging and restart steps for your phone, and arrange service if compatible chargers still fail.

The short version

  • Check the whole connection: Test the cable and adapter together on another device, check the outlet with a lamp, and remove a case that obstructs the connector.
  • Respect port warnings: Disconnect wired charging and follow your phone maker’s drying instructions when moisture is detected.
  • Allow recovery time: A completely drained phone may need time connected to power before showing a charging indicator.
  • Know when to stop: Persistent failure after the basic checks calls for hardware inspection.

CheckWhen to use itWhat to do
Cable and power sourceEvery charging attempt failsTry another compatible cable or adapter with your phone; check the outlet with a lamp
Direct iPhone connectionAdapters sit between the phone and power sourceRemove intervening adapters and check for damage
Xiaomi charging checksA Xiaomi will not chargeUse original compatible accessories at room temperature
Galaxy port inspectionVisible debris or damaged contactsInspect with a flashlight and follow cleaning instructions
Pixel port inspectionUSB liquid, debris or overheating warningDisconnect power and keep objects out of the port
iPhone moisture alertLiquid detection blocks chargingDisconnect the cable and let the connector dry
iPhone wireless chargingThe connector is dryingUse a compatible Qi-certified charger with a dry phone back
Pixel moisture warningMoisture is in the USB portSwitch off and dry at room temperature
Galaxy moisture warningA water-drop warning appearsDisconnect, switch off and dry completely
Galaxy USB cacheThe warning persists after dryingClear the USB cache if the menu is available
Pixel USB cacheThe clean, dry port still shows a warningClear the applicable system-app cache
iPhone battery recoveryA supported iPhone is unresponsiveCharge, force restart and charge again
Pixel battery recoveryA Pixel is completely drainedAllow recovery time before starting it
Galaxy battery recoveryA Galaxy is drained or unresponsiveUse the restart and wall-charging sequence
Pixel display checkThe screen remains blackRestart and call the phone
iPhone temperatureTemperature has paused chargingMove to a suitable environment
Galaxy temperature and progressCharging slows or pausesStop demanding activity and check battery status
Galaxy wireless chargingYour model supports itCenter the phone and remove obstructions
Pixel wireless chargingYour model supports itTry a model-compatible wireless charger
iPhone charge limitCharging stops at a chosen percentageRequest a full charge or change the limit
Optimized Battery ChargingAn iPhone pauses around 80%Resume charging or turn off the feature
Pixel charging optimizationAn adaptive delay or charge cap appliesReview charging optimization
Pixel automatic protectionExtended charging holds the battery around 70% to 80%Request a full charge or restart
Galaxy Battery protectionCharging stops at a protection limitReview the available protection options
Pixel diagnosticsA Pixel 6 or later still startsRun charging diagnostics and review device health
Samsung Members diagnosticsA compatible Galaxy still startsRun battery and charging checks
Galaxy Safe modeA downloaded app may affect chargingTest charging with Safe mode enabled
Galaxy app removalCharging works in Safe modeRemove suspect apps individually and retest
RepairCompatible chargers still failArrange inspection through the manufacturer

Check the cable and power source separately

To fix a phone that will not charge, start by testing the adapter and cable on another device, then try your phone with a different compatible cable and adapter. Reseat both cable ends and test the outlet with a lamp. Remove a case or battery pack that obstructs the connector or presses the phone’s buttons.

For an iPhone, connect directly to a wall adapter, computer or power accessory, removing intervening adapters. Check for broken cables or bent prongs and replace damaged accessories. Try another outlet as well as another cable.

On Xiaomi phones, reseat the connections, test the adapter on another device, then retry with the original compatible adapter and cable. Charger compatibility depends on the model, so use accessories suited to your phone.

Inspect the charging port carefully

On a Galaxy, turn off the phone and inspect the port with a flashlight. Carefully remove visible debris with a soft brush, following your model’s cleaning instructions. Avoid metal objects and liquids, and seek service for damaged or corroded contacts.

For a Pixel showing a USB liquid, debris or overheating warning, disconnect power and inspect the cable and port without inserting anything. To dislodge debris, gently tap the phone against your hand with the port facing down. If moisture is present, let the port dry before reconnecting.

Let a wet connector dry before charging

On an iPhone XS, XS Max, XR or later displaying a liquid-detection alert, unplug both ends of the cable. Gently tap the phone against your hand with its connector pointing downward, then leave it somewhere dry with airflow. Avoid rice, heat, compressed air and objects inserted into the connector.

Wait at least 30 minutes before trying the iPhone again; persistent moisture can require up to 24 hours to dry. Once the connector is dry, disconnect and reconnect the adapter and cable if charging still fails. On an iPhone that supports wireless charging, you can use a compatible Qi-certified charger after ensuring the back of the phone is dry.

For a Pixel with moisture in its USB port, switch it off and leave it on a flat surface to dry at room temperature. Reconnect only after the port is dry and the warning clears. Keep objects out of the port while inspecting it.

For a Galaxy with a moisture warning, disconnect the charger, turn off the phone and wipe it dry. Gently shake it 5 to 10 times with the port downward, then leave it in ventilation or use a fan. Once completely dry, restart it and try a dry cable in a less humid location.

If a Galaxy warning persists after the port is completely dry, open Settings > Apps > Filter and sort, enable Show system apps, then tap OK. Open USB Settings > Storage and tap Clear cache. Menus vary by model and software; if your phone does not show that entry, use Samsung’s support or service options.

On a Pixel, clear the USB cache only after the port is clean, dry and has rested for several minutes. Open Settings > Apps > See all apps > More > Show system apps. Open USB Settings or Android System, then select Storage & cache > Clear cache. This route applies to software showing those entries; contact support if the entry is missing, the warning returns or USB remains disabled.

Give a drained battery time to recover

For an iPhone 8 or later, including iPhone SE second generation and later, charge for 30 minutes before forcing a restart. Quickly press and release Volume Up, quickly press and release Volume Down, then hold the Side button until the Apple logo appears. Leave it charging for another 30 minutes.

With a Pixel, keep a known-working charger connected for at least 10 minutes. Google says a long-unused, completely drained battery may remain unresponsive for 25 minutes. Hold Power for 5 to 7 seconds to start it.

On a Galaxy, hold Side and Volume Down until the Samsung logo appears, then charge from a working wall outlet with a known-good compatible Samsung charger for at least one hour. The charging indicator may take 10 minutes to appear. Disconnect the charger, hold Power for 15 to 20 seconds, and, if the phone starts, turn it off to finish charging. Button naming varies by model.

A fully discharged Xiaomi needs at least 30 minutes of charging before you try to start it. Move it to normal room temperature and use the original compatible adapter and cable. If those checks fail, seek Xiaomi after-sales service.

A Pixel’s blank screen can also point to a display problem. Hold Power for about 35 seconds, wait two minutes, then call the phone. If it rings while the screen remains blank, seek display repair.

Check temperature and wireless charging

For an iPhone running iOS 16 or later whose charging has paused because of temperature, move it into an environment between 0 and 35°C, away from sunlight. Let a cold phone warm gradually indoors and remove a case that traps heat. Apple says charging resumes automatically at a suitable temperature, and thermal protection cannot be disabled.

On a Galaxy that charges slowly or pauses in heat or cold, stop gaming, streaming and other demanding activity while charging. Let it return to room temperature before retrying. Open Settings > Battery or check the notification panel for charging progress; the remaining-time estimate may be absent at an unsuitable temperature.

If your Galaxy supports wireless charging, place it centrally on a compatible charger without obstructions. Close Galaxy Fold and Z Flip devices and place their backs toward the charger, checking the model manual for coil position. Check your model’s wireless-charging support first; Samsung says Galaxy A series phones are not compatible with wireless charging.

On a wireless-capable Pixel, try a model-compatible wireless charger. If compatible wired and wireless charging both fail, continue to diagnostics or service.

Review limits when charging stops partway

Use these settings when your battery charges but stops at a particular percentage. On an iPhone 15 or later running iOS 27, open Settings > Battery and tap Charge to 100% for a temporary full charge. Alternatively, open Settings > Battery > Charging, choose 100%, then tap Allow Until Tomorrow. For a persistent change, tap Set Limit to 100% instead.

For an Optimized Battery Charging pause around 80% on a compatible iPhone running iOS 27, open Settings > Battery and tap Resume Charging. To disable the feature on iPhone 15 or later, open Settings > Battery > Charging and turn off Optimized Battery Charging. On iPhone 14 or earlier, find that control under Settings > Battery > Battery Health & Charging.

On current Pixel software showing this path, open Settings > Battery > Battery health > Charging optimization and turn off Use charging optimization to remove an adaptive delay or charge cap. The 80% limit applies to Pixel 6a and later.

For automatic extended-charging protection holding a Pixel 3 or later, including Fold, around 70% to 80% on Android 11 or later, open Settings > Battery and tap Charge to full. Restarting also overrides this protection. Protection can reactivate when its triggering conditions recur.

On a Galaxy offering the feature, open Settings > Battery > Battery protection, then turn off Battery protection or choose another protection option. Available modes and limits vary by software version. Older instructions about a fixed 85% cap apply below One UI 6.1; later versions use different protection options.

Run diagnostics if the phone still starts

On a Pixel 6 or later, including Fold, open Settings > Device health & support and scroll down to find available diagnostics, or search Settings for diagnostics. You can also review battery health, temperature and suggested checks under Device health & support.

On a compatible Galaxy, get Samsung Members through Samsung’s official store links if needed. Open Members > Support, tap Get started under Phone diagnostics, then select Battery status, Cable charging or Wireless charging. Review the result; the tests offered depend on your hardware.

You can also test Galaxy charging in Safe mode. Hold Side and Volume Down to open the power menu, or swipe down from the top right and tap the Power icon. Touch and hold Power off, then tap Safe mode. Test charging and restart normally to exit.

If the power-menu route is inconvenient, turn the Galaxy off, then turn it on. When the Samsung logo appears, hold Volume Down until startup finishes, then check for Safe mode at the bottom left. Test charging, then restart to exit.

If charging works in Safe mode, a downloaded app is implicated. Uninstalling removes the selected app from your phone. Remove recently installed or updated apps one at a time by swiping up from Home, holding the app icon, tapping Uninstall, then tapping OK. Restart normally and retest charging after each removal.

Arrange service when charging still fails

If your iPhone still fails after the accessory checks, charging time and force restart, arrange service with Apple. For a Galaxy, use Samsung’s service-center or repair-booking option. On Pixel 6 and later, including Fold, open Settings > Device health & support for support, warranty and repair options.

Damaged or corroded Galaxy port contacts also call for service. Once compatible chargers all fail after the basic checks, arrange hardware inspection instead of buying more chargers. Repair availability and warranty coverage vary by location.

Frequently Asked Questions

Why does my iPhone charge from a wall adapter but not a computer?

For an iPhone connected to a computer or accessory, disconnect it, unlock the phone, then reconnect it. Apple says ordinary USB wall adapters should charge without unlocking, so accessory permissions do not explain failure with every normal wall adapter.

Can a Galaxy deliberately stop charging while a game is running?

Yes, supported Galaxy models can use Pause USB PD charging when gaming with a PPS PD charger rated at least 25 W and a battery level of at least 20%. Stop the game to end the battery bypass, or open Gaming Hub > More > Game Booster and turn off Pause USB PD charging when gaming. Menu placement varies.

Will enabling fast charging fix a Galaxy that does not charge at all?

Fast-charging settings address charging speed, not a dead port. For a compatible Galaxy and charger that charge slowly, open Settings > Battery > Charging settings and enable Fast charging, plus Fast wireless charging on supported hardware. Starting with Galaxy S23, Fast charging includes the former separate Super fast charging control.

Why does my Pixel charge elsewhere but not on a vehicle charging pad?

For Pixel 10, 10 Pro, 10 Pro XL and 10 Pro Fold on affected vehicle pads, remove cases and magnetic attachments, then recenter the phone. If charging still fails, use wired charging or a Qi2-certified charger.

Can Clean Energy Charging delay an iPhone charge?

Yes, Clean Energy Charging can delay charging on US iPhones with the feature. On iOS 27, open Settings > Battery and tap Resume Charging when that feature causes the delay.

Share