How to Reprogram and Retune Your Samsung TV

Learn how to reprogram Samsung TV channels by selecting the TV source, opening Auto Program or Auto Tuning, and scanning your antenna or cable feed.

Contents

Don't Miss the Good Stuff

Get tech news that matters delivered to your inbox.

To reprogram channels on your Samsung TV, select the TV source and run Auto Program or Auto Tuning from Broadcasting settings. A scan replaces your stored channel list. On supported European models, you can save a backup through Transfer Channel List using Export to USB before scanning. The tuning menu path depends on your model and region.

The short version

  • Connect the signal: Your antenna or cable feed must connect directly to the TV or its One Connect Box.
  • Select the source: Choose TV before opening the tuning settings.
  • Run the scan: Open Broadcasting, choose Auto Program or Auto Tuning, and follow the signal prompts.
  • Check the receiver: An HDMI-connected cable or satellite receiver manages its own channels.

OptionWhen it appliesWhat it does
Current Auto ProgramSupported 2025 English-language modelsScans through General & Privacy
Programación AutomáticaSupported 2025 and 2026 Colombian modelsScans through Spanish menus
Shorter Auto Program pathUS tuner models with this layoutScans from Broadcasting
Auto TuningSupported European modelsRuns an automatic scan
Digital Channel TuningSupported European digital tunersSearches specified broadcast parameters
Analogue Channel TuningSupported analogue tuners and regionsSearches an actual analogue signal
Fine TuneSupported European analogue receptionAdjusts an existing analogue channel
Cable Search OptionSupported European cable tunersConfigures cable scan parameters
Satellite SystemSupported tuners with a direct dish connectionConfigures reception before scanning
Standby Auto TuningSupported European models and regionsScans while the TV is in standby
Wake-up TimerSupported European models and regionsSchedules automatic tuning
Transfer Channel ListSupported European models and regionsExports or imports a saved list
Set Up TVSupported European models with skipped setupReopens unfinished setup stages
European factory resetEuropean S95F menu layoutResets TV settings and reopens setup
Australian factory resetSpecified 2022 through 2025 modelsResets settings through regional menus
SmartThings remoteCompatible TVs already connected to the appControls the TV tuning menus
Mobile RemoteSupported 2025 U8000F range or aboveOpens phone control using a QR code
SmartThings downloadCompatible Android and iOS phonesProvides the official companion app
USB or Bluetooth keyboardKeyboard-compatible European modelsNavigates the tuning menus
Edit ChannelsSupported European modelsRemoves or renumbers stored channels
Restore Samsung TV PlusModels and regions offering this controlRestores streaming channels
Home ModeSupported European modelsAvoids automatic settings resets from Retail Mode

Connect your antenna or cable and select TV

Connect the coaxial cable to ANT IN on the TV or One Connect Box, then change the source to TV. On supported 2025 models, open Connected Devices and select TV. An HDMI-connected cable or satellite receiver manages its own channels, so use that receiver’s tuning procedure.

On supported European models, you can reopen setup stages you previously skipped. From Home, press the Left directional button, open Connected Devices > TV, then press and hold Select and choose Set Up TV. Complete the remaining stages; this entry point does not guarantee a full retune on every model.

Run Auto Program on your Samsung TV

A new scan replaces your stored channel list. On supported 2025 English-language models, open Settings > All Settings > General & Privacy > Broadcasting > Auto Program. Select Start and complete the signal-selection prompts. Samsung also uses the regional label Auto Tuning.

The shorter US scan also replaces your stored channel list. On US TVs with this layout and a broadcast tuner, open Settings or All Settings, then choose Broadcasting > Auto Program. Select Start, then choose Air, Cable, or Both to match the connected signal. Let the scan finish and select Close.

Use Auto Tuning or Spanish menu labels

On the European QE55S95FATXXU and related supported models, an automatic scan replaces your stored channel list. From Home, press the Left directional button, then open Settings > All Settings > General & Privacy > Broadcasting > Auto Tuning Settings > Auto Tuning. If your model omits Auto Tuning Settings, select Auto Tuning directly under Broadcasting. Complete the scan prompts shown on your TV.

On supported 2025 and 2026 Colombian models, scanning also replaces the stored channel list. Open Inicio > Configuración > Todos los ajustes > General y privacidad > Emisión > Programación Automática; alternative labels are Sintonización automática and Ajuste automático. Select Iniciar or Empezar; if your TV asks for the signal type, choose Aire, Cable, or Ambos for the antenna or cable connected directly to your TV. Select Cerrar when scanning finishes.

Retune without the original remote

With a compatible TV already connected to SmartThings, open the app on your Android phone or iPhone, tap your TV, then tap Remote. Swipe horizontally through its button panels as needed and use the navigation controls to follow your TV’s tuning path. This requires the appropriate network connection and Samsung account, and the scan replaces your stored channel list.

To get the app, open the official SmartThings product page and select App Download. Install the version for your phone; compatibility varies by TV and phone.

Samsung’s supported 2025 U8000F range and above also offers Mobile Remote with Android 11 or later, or iOS 16 or later, and a supported SmartThings version. First, find your Samsung TV power button. If the TV is off, pressing Power turns it on and displays the QR code. If the TV is on, press Power to display the control menu, press it repeatedly to highlight Mobile Remote, then hold Power to select it.

Scan the displayed QR code with your phone. In SmartThings, open Devices and use the Mobile Remote card, then navigate to the TV’s tuning settings.

On keyboard-compatible European S95F and related models, plug a USB keyboard into the TV’s USB port, or, if you can already navigate the TV menus, pair a Bluetooth keyboard through Settings > All Settings > Connections > Bluetooth. Bluetooth and input-device support vary by model and region. Press F6 to open Sources and select TV, then press F4 to open Settings. Use the arrow keys and Enter to navigate the applicable tuning path, and Esc to go back.

Fix missing channels through reception settings

Check the direct coaxial connection and confirm that the source is TV. On the US scan screen, match Air, Cable, or Both to the connected signal. If you use an HDMI receiver, manage its channels through the receiver.

On supported European cable-tuner models, open Settings > All Settings > General & Privacy > Broadcasting > Auto Tuning Settings > Cable Search Option and enter your cable provider’s frequency and symbol-rate parameters. Some models omit the Auto Tuning Settings submenu, so open Cable Search Option directly under Broadcasting. Running another automatic scan replaces the stored channel list. After configuring the parameters, run Auto Tuning again.

For a supported European satellite tuner with a direct dish connection, open Settings > All Settings > General & Privacy > Broadcasting > Expert Settings > Satellite System. Configure the dish installation before scanning. On supported models, the reception selector in Channel List offers Terrestrial, Cable, or Satellite. These settings apply to the TV’s tuner, not an external satellite receiver.

Scan a specific digital or analogue broadcast

On supported European S95F and related tuner models, open Settings > All Settings > General & Privacy > Broadcasting > Expert Settings > Manual Scan > Digital Channel Tuning. Select New, configure Channel, Frequency, and Bandwidth for the required broadcast, then select Search. Discovered digital channels are stored automatically.

For supported models and regions with an actual analogue signal, follow the same path through Manual Scan, then select Analogue Channel Tuning > New. Configure Programme, Colour System, Sound System, and Channel, use Search to locate the broadcast, then select Store. This cannot recover discontinued analogue broadcasts.

Organize channels and fix a list that keeps reverting

On supported European models, press and hold Channel, or press CH LIST on a Standard Remote Control, then select Edit Channels. Alternatively, open Guide and select Edit. Select the channel you want to edit.

Deleting a channel removes it from the stored list; on models supporting channel-list backups, you can save the list first with Export to USB. Select Delete to remove the selected channel, or choose Change Number where renumbering is supported. Select Save and Exit when finished. Editing the list does not retune broadcast frequencies.

For deleted Samsung TV Plus channels on models and in regions offering the restoration control, open Channel List > Edit Channels, or Guide > Edit. Select Restore Samsung TV Plus, then Save and Exit. This restores the streaming-channel list rather than scanning your antenna connection.

If settings keep reverting on a supported European model, open Settings > All Settings > General & Privacy > Usage Mode and select Home Mode. Older sets may place Usage Mode under System Manager. Retail Mode can reset settings automatically and disable functions.

A fresh scan replaces the existing stored channel list. After choosing Home Mode, run the appropriate channel scan again.

Use a factory reset for broader setup problems

A factory reset resets TV settings and goes substantially beyond a channel rescan. On the European S95F layout, open Settings > All Settings > General & Privacy > Factory data reset, enter the security PIN, and select Reset. The TV restarts into Initial Setup, where you can configure reception again.

The Australian reset procedure also resets your TV settings. For Australian 2025 TVs, open Settings > All Settings > General & Privacy > Factory data reset, enter the PIN, and select Yes. On Australian 2023 and 2024 models, the reset item may be Factory data reset or Reset; layout varies by model and software.

Resetting an Australian 2022 model resets its TV settings. Open Home > Menu > Settings > All Settings > General & Privacy > Reset, enter the PIN, and select Yes. You can also follow the instructions to factory reset a Samsung TV for these broader setup steps.

An automatic scan replaces the stored channel list. After resetting, configure reception again or run the applicable Auto Program or Auto Tuning procedure.

Frequently Asked Questions

How do you back up and restore a Samsung TV channel list?

On supported European S95F and related models, connect USB storage and open Settings > All Settings > General & Privacy > Broadcasting > Expert Settings > Transfer Channel List. Enter the TV PIN when requested and select Export to USB to save your current list. Importing restores a saved channel configuration rather than searching for changed broadcast frequencies. To restore it, connect USB storage containing a compatible saved list, return to Transfer Channel List, enter the PIN when requested, and select Import from USB.

Can a Samsung TV scan channels while it is in standby?

Yes, supported European S95F and related models offer Standby Auto Tuning, depending on the region. Open Settings > All Settings > General & Privacy > Broadcasting > Auto Tuning Settings > Standby Auto Tuning; if your model omits the submenu, open the function directly under Broadcasting. Enable the function to scan while the TV is in standby.

Can you schedule an automatic channel retune?

On supported European S95F and related models and regions, open Settings > All Settings > General & Privacy > Broadcasting > Auto Tuning Settings > Wake-up Timer. If your model omits Auto Tuning Settings, open Wake-up Timer directly under Broadcasting. Set the time for the TV to turn on and scan automatically.

How do you adjust reception for an existing analogue channel?

On supported European S95F and related models receiving analogue broadcasts, open Settings > All Settings > General & Privacy > Broadcasting > Expert Settings > Fine Tune. Adjust reception using the displayed controls. This adjusts the existing analogue channel rather than scanning for digital channels.

Share