Your Epson printer can appear offline because its connection is interrupted, its print queue is paused or blocked, or your device is using an old printer entry. Restart the printer, check its connection, then repair the queue on your device. The Windows steps use Windows 11 menus; printer control panel instructions apply only to the Epson models named.
The short version
- Start with power: Turn the printer off, unplug it for 30 seconds, then reconnect it and turn it on.
- Check the connection: Connect your computer or phone to the same network as the printer for local network printing.
- Check the queue: Cancel blocking jobs in Windows or resume a paused printer in Mac Print Center.
- Reinstall last: Re-add the printer or reinstall its Epson software after connection and queue fixes fail.
| Fix | When to use it | Where to start |
|---|---|---|
| Restart the printer | Printer is unresponsive | Power cable and printer power |
| Run a standalone printer check | You need to separate printer trouble from computer trouble | Supported model's nozzle check |
| Match the network | Device and printer use different networks | Device Wi-Fi connection |
| Repair USB communication | A USB-connected Epson printer is offline on a Mac | Cable, USB port, and hardware detection |
| Wake a shared printer's host | Printer is shared from another Mac | Host Mac and printer sharing |
| Restart network devices | A supported model has network connection trouble | Router, device, and printer |
| Reconnect printer Wi-Fi | Router or Wi-Fi password changed | Model-specific setup wizard |
| Print a connection report | Wireless setup fails | Supported model's connection check |
| Correct router restrictions | Range, network band, or access controls block communication | Printer placement and router settings |
| Select the Windows default printer | Windows selects an old or disconnected queue | Printers & scanners |
| Cancel Windows jobs | Pending jobs block printing | Open print queue |
| Restart Print Spooler | Jobs remain stuck | Print Spooler in Services |
| Clear spooler files | Ordinary queue cancellation fails | Pending print files |
| Restart Windows | Printing still fails after queue repairs | Start > Power > Restart |
| Run Epson connection diagnostics | A supported L8050 installation cannot connect | Epson Printer Connection Checker |
| Inspect Epson driver status | You need the printer's reported condition | EPSON Status Monitor 3 |
| Resume or clear the Mac queue | Printer or job is paused or blocked | Print Center |
| Check the Mac app | Only one app cannot print | TextEdit and the app's printer selection |
| Adjust Mac printer features | Print Dialog Extensions cause trouble | Options & Supplies |
| Restore iPhone or iPad permission | Epson's app cannot discover local printers | Local Network |
| Restore Android discovery | Smart Panel requests precise location or loses its connection | App permissions and connection refresh |
| Reselect the printer in iPrint | The iOS app cannot find your printer | Local or Manual IP |
| Enable Android printing | An installed print service is turned off | Printing |
| Repair Chromebook setup | Printer selection or saved connection details are wrong | Destination and printer settings |
| Re-add the Windows printer | Connection and queue repairs fail | Remove, then Add device |
| Install manually in Windows | Discovery or an affected ARM installer fails | Add manually |
| Add the Mac printer again | The printer needs a working queue | Add Printer, Scanner, or Fax |
| Add the Mac printer by address | Automatic network discovery fails | IP in the add-printer window |
| Get Epson software | You need the package for your model and operating system | Epson model's Downloads |
| Reset printer networking | Earlier wireless fixes fail | Model-specific network reset |
| Reinstall wireless software | Windows wireless setup still fails | Epson's model-specific setup package |
| Reset Mac printing | Other Mac printing repairs fail | Reset Printing System |
Restart the printer and check its display
Turn the Epson printer off and unplug its power cable. Wait 30 seconds, reconnect the cable, and turn the printer on.
On an Epson ET-3930, ET-3940, or ET-3950 series printer, resolve any displayed errors before running a standalone check. Disconnect its interface cables, load plain paper, press Home, and select Maintenance > Print Head Nozzle Check. Follow the displayed instructions to print the check.
A successful standalone print points toward a connection, software, or computer problem, so continue with the relevant fixes below. If the check fails, troubleshoot the printer itself or contact Epson support.
Check the cable or Wi-Fi network
For a Wi-Fi-connected Epson printer, compare its SSID, the Wi-Fi network name, with the network your computer or phone uses. Reconnect your device to the printer's network if they differ. Epson Smart Panel and iPrint discover local printers on that network.
For an Epson printer connected to a Mac by USB, turn the printer off, reseat the cable, and turn it back on. Connect it directly to the computer, bypassing USB hubs and switchboxes. If it remains offline, try another USB port and another cable; Epson specifies a shielded cable no longer than 6.5 feet (2 meters).
On a Mac, hold Option, open the Apple menu > System Information, and inspect the hardware list for the USB printer. For a printer shared from another Mac, wake that Mac and ensure printer sharing remains enabled.
For network problems on the ET-3930, ET-3940, ET-3950, or L8050, turn off the router, computer or mobile device, and printer. Wait approximately 10 seconds, then turn them on in this order: router, computer or mobile device, printer. Retry printing.
Reconnect the printer to Wi-Fi
After a router or Wi-Fi password change, reconnect an ET-3930, ET-3940, or ET-3950 series printer through its wireless setup wizard. Press Home, select the network icon, and press OK. Select Wi-Fi (Recommended), then Start Setup or Change Settings, followed by Wi-Fi Setup Wizard.
Choose your SSID, press OK, enter the Wi-Fi password, and select OK. Review the settings and select Start Setup. Select Close after a successful connection; if setup fails, choose Print Check Report or Re-enter.
To run a separate connection check on those models, press Home and open Settings > General Settings > Network Settings > Connection Check > Print Check Report. Press Start to print the report, then apply the solutions associated with its error codes.
For these three series, move the printer closer to the router and away from interference, and make sure a 2.4 GHz network is available. Epson recommends separate SSIDs when troubleshooting a combined-band network. Enter a hidden SSID manually; if the router uses MAC filtering, add the printer's MAC address from its network status sheet to the permitted list.
If those models connect but cannot communicate with other devices, disable the router's Privacy Separator when it is blocking communication. Check the printer's IP configuration; if the network does not provide DHCP, configure an appropriate address manually. Router and address-entry menus vary by model, so follow the instructions for your equipment.
Clear blocked printing in Windows
On Windows 11, open Start > Settings > Bluetooth & devices > Printers & scanners. Turn off Let Windows manage my default printer if necessary, select the working Epson printer, then select Set as default. This helps when Windows has selected an old or disconnected queue.
Canceling all jobs removes the pending jobs from that queue. On Windows 11, open Settings > Bluetooth & devices > Printers & scanners, select your Epson printer, and choose Open print queue. Open ... and select Cancel all.
If jobs remain stuck, restart the print service. Press Windows + R and enter the following command:
services.mscPress Enter, then right-click Print Spooler and select Restart. Administrative rights may be needed. Retry printing after the service restarts.
If ordinary queue cancellation fails, manually clearing spooler files discards pending print jobs. Press Windows + R, enter services.msc, and press Enter. Right-click Print Spooler and select Stop.
In File Explorer, open C:\Windows\System32\spool\PRINTERS and delete the files inside. Return to Services, right-click Print Spooler, and select Start. Administrative rights may be needed for this repair.
If printing still fails, select Start > Power > Restart and try again. These Windows connection and queue checks can also help you fix a printer that shows offline from another manufacturer.
For an L8050 with supported Epson software installed, open Start > All apps > Epson Software > Epson Printer Connection Checker. Run the check and apply the solution it displays.
In the L8050's Epson printing preferences, select Maintenance > EPSON Status Monitor 3 to inspect the printer's condition. If the monitor is disabled, open Maintenance > Extended Settings and select Enable EPSON Status Monitor 3.
Resume printing on a Mac
Open Print Center from the Dock and inspect the Epson queue. Select Resume for a paused printer or Resume Job for an individually paused job. Deleting a job removes that job from the queue. Select Delete Job for a blocking job you want to cancel.
Try printing from TextEdit if the queue looks ready but your document still will not print. If only one app fails, troubleshoot that app and verify that its print dialog selects the intended Epson printer.
When printer software using Print Dialog Extensions causes trouble, open System Settings > Printers & Scanners, select the printer, and open Options & Supplies. Select Use Generic Printer Features, then click OK.
Restore printer discovery on your phone
If your iPhone or iPad shows Privacy & Security in Settings, open Settings > Privacy & Security > Local Network. Turn on access for Epson Smart Panel or iPrint when listed. When the app requests local-network access, tap Allow.
On Android 12 or later, if Smart Panel reports that precise location is required, open Settings > Apps > Epson Smart Panel > Permissions > Location. Select Allow only while using the app and turn on Use precise location. In Smart Panel on Android, use the connection-status refresh icon at the top right after a disconnect.
In Epson iPrint for iOS, tap Printer is not selected. Tap here to select a printer. and choose your printer under Local.
If it is absent, tap Search. Alternatively, open Manual IP > Add, enter the printer's current IP address, and tap Done.
For Android 9 or later using an installed compatible print service, open Settings > Connected devices > Connection preferences > Printing. Select the service and turn it on. Android menu labels can differ by manufacturer.
Correct a saved Chromebook printer
On a Chromebook, press Ctrl + P, open Destination > See more..., and select the Epson printer. If its saved details are wrong, select the time, then open Settings > Device > Printers and scanners > Print. Beside the printer, select More > Edit and correct its information.
If correcting the details does not help, removing the saved printer removes that printer entry. Beside it, select More > Remove, then set it up again. For a discovered printer under Other available printers, select Save beside it.
If the printer needs manual setup, open Settings > Device > Printers and scanners > Print > Other available printers > + Add printer manually. Enter the printer's actual connection information. If school or work policy prevents you from adding it, contact your administrator.
Re-add the printer or reinstall Epson software
Removing the Windows printer removes that printer entry. On Windows 11, open Settings > Bluetooth & devices > Printers & scanners, select your printer, and choose Remove, then Yes. Return to Printers & scanners, select Add device, and add the powered-on printer.
If Windows discovery fails, select Add manually and choose the appropriate connection option. For local setup, choose Add a local printer or network printer with manual settings, select Next, and choose the actual port and matching driver. On affected ARM-based PCs where the manufacturer installer fails, use this Windows installation route.
On a Mac, open System Settings > Printers & Scanners > Add Printer, Scanner, or Fax. Select the discovered printer and click Add. AirPrint-compatible Epson models can work without Epson drivers.
If your Mac does not discover the network printer, click the IP button in the add-printer window. Enter its current IP address in Address, choose a supported Protocol, specify Queue if needed, verify Use, and click Add. Use Default printer in Printers & Scanners to select the working queue.
On a managed Mac network that requires an AirPrint configuration profile, obtain the current printer profile from your administrator. Double-click it, click Continue, then click Install. The profile appears in System Settings > General > Device Management; then add the printer.
For Epson software, find your exact model on Epson's printer download page, open Downloads, and select the correct operating system. Download the driver or setup package offered for that model. Available downloads and operating system support vary by printer.
Use resets only after the earlier fixes fail
Resetting network settings removes the printer's saved network settings. On an ET-3930, ET-3940, or ET-3950 series printer, press Home and select Settings > Restore Default Settings > Network Settings, then Yes. Reconnect through the Wi-Fi setup wizard above.
For persistent failed wireless setup in Windows, Epson's reinstallation procedure also begins with a network reset, which removes saved network settings. Follow your model's reset instructions, then turn the printer off and disconnect its interface cables.
Uninstalling removes the selected Epson software. On Windows 11, open Settings > Apps > Installed apps, find the Epson program, and select More > Uninstall.
Restart the router, then reinstall your product's network software as described in your product documentation. Complete its wireless setup. Restore any firewall protection temporarily disabled during setup.
Resetting the Mac printing system removes all printers, completed jobs, and presets. As a last resort, open System Settings > Printers & Scanners, hold Control while clicking the printers list, and choose Reset Printing System. Re-add your printers afterward.
Frequently Asked Questions
Why does my Epson printer go offline after sitting unused?
On the ET-3930, ET-3940, and ET-3950 series, automatic shutdown can explain an apparent offline state. If automatic shutdown is the cause, turn the printer on, press Home, and select Settings > General Settings > Basic Settings > Power Off Timer, then choose a longer available interval.
How do I reconnect an Epson ET-2400 without a screen?
Press the router's WPS button, then within two minutes hold the ET-2400's Wi-Fi button for approximately five seconds, until the Wi-Fi and Wi-Fi Direct lights flash alternately. A green Wi-Fi light indicates success. These steps are verified for the ET-2400; if you have another Epson model, check its own instructions.
Why does Epson printing stop when I switch apps on my phone?
Switching apps or entering power-saving mode can interrupt Epson Smart Panel or iPrint printing. Return the Epson app to the foreground if printing stopped after either action.
Can too many devices prevent a Wi-Fi Direct connection?
The ET-3930, ET-3940, and ET-3950 series support eight connected Wi-Fi Direct devices. Check connected clients in Web Config or on the network status sheet. Removing the printer's SSID from an unused device disconnects that device. If all eight connections are occupied, remove that SSID from an unused device to free a connection.
Should I restore Google Cloud Print to fix an offline Epson printer?
Google Cloud Print was discontinued on January 1, 2021. Replace that workflow with supported local ChromeOS printing, an Android print service, or an applicable Epson printing service.