Clear printer errors, select the correct Brother printer in your app, and cancel blocked jobs to fix a Brother printer that is connected but not printing. A connection alone does not clear a paper or cartridge fault, resume a paused queue, or update an outdated network address. The Windows steps below use Windows 11 menus.
The short version
- Printer readiness: Wake the printer and resolve errors shown on its display or LEDs.
- Correct destination: Select the intended Brother printer in your app and check for duplicate entries.
- Blocked jobs: Cancel stuck Windows jobs or resume paused Mac jobs before sending the document again.
- Connection repair: Check the cable or wireless network, then use the repair option supported by your model.
| Fix | When to try it |
|---|---|
| Clear displayed errors and check supplies | The printer reports a fault |
| Restart the printer and computer | Printing still fails after clearing errors |
| Select the correct printer | Your app uses another queue or a PDF destination |
| Set the default printer | Windows keeps selecting another printer |
| Cancel queued Windows jobs | Documents remain stuck in the queue |
| Try another file and app | Printing fails in one application |
| Check Ethernet or Wi-Fi placement | A network connection fails |
| Improve reception and restart network devices | Wireless printing remains unreliable |
| Repair the USB connection | A supported USB model cannot print |
| Print a WLAN report | A supported model needs wireless diagnosis |
| Restart Print Spooler | Windows jobs remain blocked |
| Clear spool files manually | Normal cancellation fails |
| Run Brother’s network repair tool | The driver needs the printer’s current IP address |
| Check security software | Another computer can print over the network |
| Remove and add the Windows printer | Simpler Windows fixes fail |
| Install the supported Brother package | The printer needs a compatible driver |
| Turn off protected print mode | You need Brother drivers on a PC offering that mode |
| Use the supported IPP alternative | You keep protected print mode on with a compatible printer |
| Ask an administrator to check print policy | A managed PC enforces protected print mode |
| Resume or delete a Mac print job | A paused or blocking job stops printing |
| Set the Mac default printer | Your Mac selects the wrong printer |
| Check Mac app behavior and USB detection | You need to narrow down the Mac problem |
| Create a fresh Mac queue | The existing queue still fails |
| Allow Mac local-network access | A Brother app cannot communicate with the printer |
| Reset the Mac printing system | Simpler Mac fixes have failed |
| Check AirPrint readiness | A compatible printer cannot print from your Apple device |
| Allow iPhone or iPad local-network access | A Brother app needs permission |
| Restart the Android print service | Printing fails through the selected plugin |
| Reconnect through Brother Mobile Connect | A compatible printer needs wireless setup again |
Clear printer errors and restart the printer
Press a control-panel button to wake your Brother printer, then check its display or LEDs. Resolve any indicated paper jam, empty ink or toner, or other fault using your model’s User’s Guide before resending the job. The physical steps and error indicators differ between models.
On the HL-L2405W, HL-L2420DW, HL-L2460DW, HL-L2460DWXL, and HL-L2865DW, check that paper is loaded correctly and the cover is completely closed. Remove any remaining protective packaging and check that the toner cartridge and drum assembly are properly installed. Follow your model’s instructions for other printers.
Powering off deletes jobs held by Brother’s Windows Secure Print feature on the DCP-L3560CDW, MFC-L3720CDW, MFC-L3760CDW, MFC-L3765CDW, and MFC-L3780CDW. Turn off the printer, unplug it for 30 seconds, reconnect power, and turn it on. On Windows 11, restart your computer too, then retry printing.
Select the right printer and clear the Windows queue
In your Windows 11 app, open File > Print and select the intended Brother queue. Check the paper size, orientation, layout, and page range, and avoid selecting a PDF destination. Uncheck Print to file if selected; available options depend on the app.
Open Start > Settings > Bluetooth & devices > Printers & scanners with the printer powered on. Check the Brother entries and select the working entry when printing, particularly if you have changed USB ports or installed the driver repeatedly. To make it the default, turn off Let Windows manage my default printer if necessary, select your Brother printer, and choose Set as default.
Cancelling all jobs removes the pending documents from that print queue. Select your Brother printer, choose Open print queue, open the ellipsis menu, and select Cancel all. Send the document again after the queue clears.
Try another file and another app, then restart the affected app if printing fails only there. If Windows identifies the printer as offline, continue with the steps to fix a printer showing offline.
Check the cable or wireless connection
For network-capable models covered by Brother’s offline-printer instructions, including the HL-L8430CDW, reseat Ethernet at both the printer and router or access point. For Wi-Fi, connect the computer and printer to the router’s same SSID, then check the printer’s network configuration report for its current IP address. Follow your model’s instructions for printing that report.
For a Brother Wi-Fi printer, move it closer to the router and reduce obstructions between them. Restart the router or access point, computer, and printer in that order, and restart any wireless repeater. Allow at least five minutes for reconnection before retrying; some models require an optional wireless module.
For the Brother HL-L1222(-V) and HL-L2400D, reconnect the USB cable at both ends and connect directly to the computer instead of through a USB hub. Check that the cable uses the printer’s USB socket, try another computer USB port, and test another USB 2.0 cable no longer than 2 meters. Click Allow or Yes if prompted to approve the connection; check the cable requirements for other models.
On the HL-L2405W, HL-L2420DW, HL-L2460DW, HL-L2460DWXL, and HL-L2865DW, print a WLAN report to identify a wireless connection problem. Use ▲ or ▼ to select Print Reports, press OK, select WLAN Report, and press OK again. Press Go, then use the connection status and TS error code to identify the fault.
Restart the Windows printing service
When Windows jobs remain stuck, restart Print Spooler, the Windows printing service. Press Windows + R and enter this command:
services.mscPress Enter, then right-click Print Spooler and select Restart. Administrator access may be required. Retry printing after the service restarts.
Manually clearing spool files discards queued print jobs. If normal queue cancellation fails and you have administrator access, return to Services, right-click Print Spooler, and select Stop. In File Explorer, open C:\Windows\System32\spool\PRINTERS and delete its contents, then return to Services and start Print Spooler.
Repair the network address and check blocked communication
A Brother network driver may need the printer’s current IP address before printing works again. For Windows models that support it, download and run Network Connection Repair Tool from your exact model’s Downloads page. The utility finds the printer and updates the IP address used by its driver; retry printing afterward.
Choose your operating-system family and version before downloading a package. The Brother downloads page for MFC-L3780CDW applies to that model, so select your exact model for another printer. Obtain only the utilities and drivers offered for your model and operating system.
If another computer can print over the network, inspect the affected Windows computer’s security software. Follow that product’s instructions to allow Brother network communication. Brother says security software can block communication without displaying an alert.
Reinstall the Windows printer and check driver compatibility
Removing the printer removes its installed entry from Windows. Open Start > Settings > Bluetooth & devices > Printers & scanners, select your printer, choose Remove, and select Yes. Return to Printers & scanners and select Add device while the printer is powered on and connected.
For a Brother driver installation, select the supported package for your exact model and Windows version from its Downloads page. If the manufacturer’s installer fails on an ARM PC, use Windows printer installation through Add device.
When you need Brother drivers and Windows offers protected print mode, open Start > Settings > Bluetooth & devices > Printers & scanners. Under Printer preferences > Windows protected print mode, click Turn off, click Yes, and reinstall the Brother driver. If you see Set up, the mode is already off.
For a compatible, Mopria-certified Brother printer, you can instead keep protected print mode enabled and add the printer through Windows. Brother supports Microsoft IPP Class Driver for basic printing and Brother Print Support App for additional supported features. The app requires Windows 11 version 24H2 or later, internet access, and a model on Brother’s Product Support List.
For that supported app setup over a network, open Start > Settings > Bluetooth & devices > Printers & scanners, select Add device, then select Add device beside the detected printer. The app installs automatically from Microsoft Store. For USB, connect the printer to trigger installation.
If a managed work or school PC enforces protected print mode, ask your administrator to review the policy. The switch in Settings cannot override an enforced policy.
Resume printing or rebuild the queue on Mac
Open Print Center from the Dock and click Resume for a paused printer or Resume Job for a paused document. Deleting a blocking job removes that job from the queue. Select the blocking document and click Delete Job if it needs to be removed.
Open the Apple menu > System Settings > Printers & Scanners and set Default printer to the intended Brother printer. Try printing a simple document in TextEdit. For a USB connection, hold Option and choose the Apple menu > System Information to check USB detection.
If the queue still fails, select Add Printer, Scanner, or Fax in Printers & Scanners and add a fresh queue using a connection and driver supported by your model. Some Brother models use AirPrint instead of a downloadable Mac printer driver. Removing the old entry removes that printer queue from your Mac. Test the new queue before removing the old entry.
For a Brother app that needs local-network access, open the Apple menu > System Settings > Privacy & Security > Local Network and turn on access for the app. This applies to Macs offering those privacy controls, including when Brother iPrint&Scan needs network access.
Resetting the Mac printing system removes printer queues, completed-job information, and printer presets. Use this only after simpler troubleshooting: open the Apple menu > System Settings > Printers & Scanners, hold Control while clicking the printer list, and choose Reset Printing System. Add your printers again afterward.
Restore printing from your phone or tablet
For AirPrint-compatible models in the Brother DCP-L3520CDW and MFC-L3780CDW family, make sure the printer is powered on and your Apple device is on the same network. Move the mobile device closer to the access point or printer. If a multipage job prints only its first page, update the device’s operating system.
When printing through a Brother app on iPhone or iPad, open Settings > Privacy & Security > Local Network and turn on the relevant app. Tap Allow if its permission prompt appears. This app permission is separate from system AirPrint.
On Android, open Settings > Connected devices > Connection preferences > Printing, then select Mopria™ Print Service (MPS) or Brother Print Service Plugin. Turn the selected service off and on again, especially after a plugin update, and restart the mobile device if necessary. Android menu paths vary by device, so find its printing settings if those categories differ.
For a compatible printer that needs its wireless connection configured again, install the app using the store link on the official Brother Mobile Connect page. Open Brother Mobile Connect, select Add Machine > Not Connected, and connect your phone to the intended wireless network. Tap Connected and complete the model-specific setup instructions to add the printer.
Frequently Asked Questions
How do you fix a Brother printer connection on a Chromebook?
Select the time, then open Settings > Device > Printers and scanners > Print. Beside the printer, select More > Edit and correct its information, or use Other available printers > + Add printer manually for another connection. Use a compatible network or USB printer, since Chromebook Bluetooth printing is not supported.
Can you connect a phone directly to a Brother printer without the router?
On the DCP-L3560CDW, MFC-L3720CDW, MFC-L3760CDW, MFC-L3765CDW, and MFC-L3780CDW, open Settings > All Settings > Network > Wi-Fi Direct > Manual on the printer. In your phone’s Wi-Fi settings, select the printer’s displayed SSID and enter its displayed password, then tap OK on the printer if it requests connection approval. This establishes an alternative connection without repairing the router connection.
How do you release a document held by Secure Print?
For a job sent using Brother’s Windows Secure Print feature, release it from the printer’s touchscreen. On the DCP-L3560CDW, MFC-L3720CDW, MFC-L3760CDW, MFC-L3765CDW, and MFC-L3780CDW, select Secure Print and your user name, enter the four-digit password, and tap OK. Select the job, enter the number of copies, tap OK, and then tap Start.
What should you do when the printer shows Cannot Print XX?
On the MFC-J1205W and MFC-J1215W, unplug the printer, remove the paper tray, and inspect for paper scraps or foreign objects. Reinstall the tray and reconnect power. If the error remains, contact Brother for service; Mobile Connect can identify the error represented by the LEDs.