How to Check for and Install Chromecast Updates

Learn how to update Chromecast through Google TV settings or automatic updates, check its firmware version, and restart an installation that stalls.

Contents

Don't Miss the Good Stuff

Get tech news that matters delivered to your inbox.

To update Chromecast with Google TV, open All settings > System > About > System update; for Chromecast 2nd or 3rd generation, Ultra, or Audio, leave it powered on and connected to the internet for automatic updates. Google TV Streamer uses the same TV update menu. App updates are separate from system firmware updates.

The short version

  • Google TV models: Open All settings > System > About > System update on the TV.
  • Classic Chromecast: Leave your Chromecast 2nd or 3rd generation, Ultra, or Audio powered on and online to receive available firmware automatically.
  • Version check: Find Cast firmware version in Google Home under your classic device’s Device information.
  • Stalled installation: Disconnect power for one minute, then reconnect the device to restart a stuck update.

OptionDevice or situationWhat it does
TV system update menuChromecast with Google TV and Google TV StreamerChecks for and installs system updates
Automatic firmware updatesChromecast 2nd and 3rd generation, Ultra, Audio, and Google TV modelsReceives available updates over the internet
Setup updateChromecast 2nd and 3rd generation, Ultra, and Google TV modelsInstalls software during setup
Google Home version checkClassic Chromecast and Chromecast AudioShows installed Cast firmware
Phone remoteChromecast with Google TV and Google TV StreamerOperates the TV update menu
Join Preview ProgramChromecast 2nd and 3rd generation, Ultra, and Audio when enrollment is offeredWaits for a preview firmware release
Leave Preview ProgramEnrolled classic devicesReturns to production firmware when released
Manual app updatesGoogle TV devicesUpdates installed applications
Automatic app updatesGoogle TV devicesControls automatic application updates
Cast receiver updateAndroid TV devices with the specified menusUpdates the built-in Cast component
Power restartChromecast 2nd and 3rd generation, Ultra, and Google TV modelsRestarts a stalled update
Menu rebootClassic Chromecast, Ultra, Audio, and Google TV modelsRestarts the device for troubleshooting
Audio setup recoveryChromecast AudioRetries a stalled setup update
Software factory resetChromecast 2nd and 3rd generation, Ultra, Audio, and Google TV modelsErases device data before another setup attempt
Hardware factory resetChromecast 2nd and 3rd generation, Ultra, Audio, and Google TV modelsErases device data using the device button
Google TV Streamer product pageOwners considering the successor productProvides product information rather than a firmware installer

Choose the update method for your Chromecast

If you have Chromecast with Google TV HD or 4K, or Google TV Streamer (4K), you can check for system updates on the TV. These models also normally download updates automatically. Use the TV menu when you want to check for an available system update yourself.

For Chromecast 2nd generation, Chromecast 3rd generation, Chromecast Ultra, and Chromecast Audio, available firmware arrives automatically while your device is powered on and connected to the internet. You can check its installed version in Google Home. Google says first-generation Chromecast no longer receives software or security updates; Google TV Streamer is the current successor product.

Check for system updates on Google TV

From the Google TV home screen, select All settings, choose System, then open About > System update. Follow the installation instructions displayed on your TV if an update is available. These steps apply to Chromecast with Google TV HD and 4K, and Google TV Streamer (4K).

Google says system updates for these devices do not appear in Google Home. You can still use your phone as a remote to reach the update menu on the TV.

To use Google Home as a remote, turn on your TV and streaming device, open Google Home, and tap the device. On iOS, tap Open remote. Use the virtual remote to open All settings > System > About > System update.

On Android, you can instead open the Google TV app, tap Connect TV, and select your device. Enter the code shown on the TV, then tap Pair and use the remote to reach the update menu. Google specifies Google TV app version 4.27.8.93 or later on Android, and iOS 14.0 or later with the latest companion app on iPhone.

Check classic Chromecast firmware in Google Home

Open Google Home, select Home > All devices, then touch and hold your Chromecast’s tile. Select Settings > Device information. Under Technical information, look for Cast firmware version.

Compare that number with the entry for your exact model in Google’s production firmware table. Updates roll out in stages, and Google adds a version to the production table once it is available to all devices of that model, so your device may still show an older installed version until it updates. For Chromecast 2nd and 3rd generation, Ultra, and Audio, keep your device powered on and connected to the internet to receive available firmware.

You can use this version check for classic Chromecast models and Chromecast Audio accessible in Google Home. If you have Chromecast with Google TV or Google TV Streamer, check system updates through the TV’s System update menu instead.

Let the setup update finish

During setup, allow the automatic software update to finish before trying to cast. Google Home shows setup progress for classic devices, while Google TV models show update information on the TV. You cannot cast during installation.

Google estimates approximately 10 to 12 minutes for setup updates on Chromecast 2nd and 3rd generation, Chromecast Ultra, Chromecast with Google TV, and Google TV Streamer. Leave your device connected while installation proceeds. Chromecast Audio also updates automatically during setup, with progress shown in Google Home.

Restart an update that has stalled

If installation is stuck, disconnect your streaming device from its power source, wait one minute, and reconnect it. Google recommends this to restart the update on Chromecast 2nd and 3rd generation, Chromecast Ultra, Chromecast with Google TV, and Google TV Streamer. Disconnecting only HDMI does not reboot the device.

For a stalled Chromecast Audio setup update, disconnect power for one minute, then reconnect it. Let setup continue, and use the factory reset recovery below if the update still fails.

For general troubleshooting on classic Chromecast, Ultra, or Audio, you can also reboot through Google Home using a phone linked to the same Google Account. Open Google Home, select Home > All devices, and hold the device tile. Select Settings > More settings > Reboot.

On Chromecast with Google TV, select Settings > System > Restart, then select Restart again. On Google TV Streamer, select All settings > System > Restart. For a stuck installation, use the power restart described above.

Factory reset only if update recovery fails

A factory reset erases device data. If restarting has not recovered the update, you can factory reset your Chromecast and repeat setup to retry the automatic update.

On Chromecast with Google TV or Google TV Streamer, select your profile, then open All settings > System > About > Factory Reset. After the reset, set up your device again and allow the automatic update to finish.

For Chromecast 2nd or 3rd generation, Ultra, or Audio on its original network, open Google Home and select Home > All devices. Hold the device tile, select Settings > More > Factory reset, then tap Factory reset. Set up your device again to retry the update.

A hardware factory reset also erases device data. If you cannot use the software reset path, keep your device powered and use its physical button. This button performs a reset for recovery rather than directly installing an update.

On Chromecast with Google TV, hold the rear button until the blinking yellow LED becomes solid white, then release it. For Google TV Streamer, hold the rear button until the LED blinks yellow, then release it when the LED becomes solid white. Set up your device again and allow the automatic update to finish.

On Chromecast 2nd or 3rd generation, Ultra, or Audio, hold the side button until the blinking orange LED becomes white, then release it. Repeat setup to retry the update. For Chromecast Audio recovery, Google recommends using an available 2.4 GHz network when setting up again.

Update TV apps and the Cast receiver separately

To update apps on Chromecast with Google TV or Google TV Streamer, search for Google Play Store on the TV and open it. Select the profile icon, then choose Manage apps & games > Updates > Update all. This updates your applications separately from system firmware.

For automatic app updates, open Google Play Store on the TV and go to Settings > Auto-update apps. Enable automatic app updates there. That setting controls your apps rather than the streaming device’s system software.

On an Android TV device that shows these menus, select Settings > Google Cast and inspect Version number. To update the component, sign in to Google Play on your Android TV, select My apps, and update the Google Cast receiver app listed there. These steps update the built-in Cast receiver; for a standalone Chromecast, use its model’s firmware update method.

Join or leave the Preview Program

You can join the Preview Program on Chromecast 2nd and 3rd generation, Chromecast Ultra, and Chromecast Audio when enrollment is offered. Joining puts your device in line for a preview release but does not trigger an immediate update. If you want production firmware after joining, leave the Preview Program.

To enroll, open Google Home and select Home > All devices, then touch and hold your device tile. Select Settings > Device information > Preview Program, tap Join Program, review the page, and tap Ok, got it. If Preview Program is missing, Google says enrollment is unavailable, so continue receiving automatic production updates.

To leave, open Google Home, select Home > All devices, and touch and hold your device tile. Select Settings > Device information > Preview Program > Leave program. Your device then waits for the next production firmware release. Leaving the program or factory resetting does not immediately replace preview firmware.

Frequently Asked Questions

Do you need a computer or a firmware download to update Chromecast?

No computer connection or firmware download file is required for automatic updates on Chromecast 2nd and 3rd generation, Chromecast Ultra, or Chromecast Audio. Your device receives available firmware over the internet.

Will rebooting force Chromecast to receive a new update?

Rebooting does not guarantee that you will receive an unreleased update. Use it to troubleshoot your device, rather than to obtain firmware that has not reached it yet.

How long does it take to return to production firmware after leaving the Preview Program?

Google says the wait can take one or two weeks. You must wait for the next production firmware release to reach your device.

Does joining the Preview Program guarantee newer firmware?

No, joining does not guarantee that you will receive a newer build than production firmware. Enrollment puts your eligible device in line for a preview release.

Share