To add a Nest thermostat to Google Home, open Google Home and tap Add > Device for a Nest Thermostat (2020) or Nest Learning Thermostat (4th gen); for a Learning Thermostat (3rd gen) or Thermostat E, set it up in Nest first and use the same Google Account in both apps. Your starting point depends on the model and whether it already has an app connection.
The short version
- Home app models: Add the Nest Thermostat (2020) and Learning Thermostat (4th gen) directly in Google Home.
- Nest app models: Set up the Learning Thermostat (3rd gen) and Thermostat E in Nest, then open Google Home with the same Google Account.
- Professional installation: Choose Already installed during setup to preserve the installer’s equipment configuration.
- Early generations: First and second generation Learning Thermostats lost Nest and Google Home connectivity on October 25, 2025.
| Method or option | When to use it |
|---|---|
| Google Home QR scanning | Initial setup of Nest Thermostat (2020) or Learning Thermostat (4th gen) |
| Automatic setup prompt | Google Home identifies a nearby Home app model |
| Setup code | You cannot scan a Home app model’s QR code |
| Manual device search | You want to find a Home app model through Add a different way |
| Professional installation setup | You need to link an installed Home app model |
| Nest app QR scanning | Initial setup of Learning Thermostat (3rd gen) or Thermostat E |
| Nest app entry key | You need an alternative to scanning a supported older model |
| Automatic account linking | Your supported older thermostat is already registered in Nest |
| Nest account migration | Your supported thermostat uses an unmigrated Nest account |
| Household invitation | You need access to a thermostat already in someone’s Google Home household |
| App or voice refresh | Your thermostat is already configured and linked |
| Remove and add again | A Nest Thermostat (2020) has a stale registration or disconnected account |
| Account disconnection or reset | You need to reconnect or prepare a previously owned supported thermostat |
| Hardware restart | Your supported thermostat is frozen and cannot restart through its menus |
| Phone connectivity checks | Pairing fails on Android or iOS |
| Local-network permission | Your setup app needs network access on iPhone or iPad |
| Workspace administrator access | You need Google Home enabled for a managed Workspace account |
| Google Home from Google Play | Install or update Google Home on compatible Android devices |
| Google Home from the App Store | Install or update Google Home on compatible iPhones and iPads |
| Nest from Google Play | Install or update Nest on compatible Android devices |
| Nest from the App Store | Install or update Nest on compatible iPhones and iPads |
Choose the app for your thermostat
Start with Google Home for the Nest Thermostat (2020) or Nest Learning Thermostat (4th gen). Install or update it on a compatible Android device through Google Play, or on a compatible iPhone or iPad through the App Store. On Android, select Install if you do not already have the app. Stay physically near the thermostat during setup.
For a Learning Thermostat (3rd gen) or Thermostat E, install or update Nest for initial setup through Google Play on compatible Android devices or the App Store on compatible iPhones and iPads. On Android, select Install if needed. You will also use Google Home, signed in with the same Google Account, to access the thermostat there. Sign in only through Google’s own app or website, and never share a code, password, or remote access with someone who contacts you.
First and second generation Nest Learning Thermostats, including the European second generation model, cannot be added through a supported app connection. Google ended their Nest and Google Home connectivity on October 25, 2025, and removed them from those apps. Resetting them or migrating an account does not restore that connectivity.
Add a thermostat directly in Google Home
For a Nest Thermostat (2020) or Learning Thermostat (4th gen), sign in to Google Home with your Google Account, then tap Add > Device. Scan the thermostat’s QR code and follow the installation, Wi-Fi, and configuration prompts. If the device was previously used, follow the reset instructions below before starting setup.
Google Home may display a setup screen automatically when you open it near the thermostat. When that screen identifies your thermostat, tap Set up or Next. If it identifies a different device, tap Not now or Set up a different device. Complete the thermostat setup prompts.
When scanning does not work, tap Use setup code from the scanner and enter the thermostat’s setup code. The app explains where to find it. You can also tap Add a different way from the device-adding screen, search for the thermostat, select the matching device, and finish setup.
Google replaced the previous multi-option setup menu with the current Add > Device flow and its QR code scanner. Use that flow’s QR scanning, setup-code entry, or device search when older instructions show a different menu.
Finish setup after professional installation
If a professional installed your Nest Thermostat (2020) or Learning Thermostat (4th gen), connect your phone to your home Wi-Fi and sign in to Google Home. Tap Add > Device, then identify the thermostat by scanning its QR code, entering its setup code, or searching for the device.
At the Get started screen, tap Already installed. Choose the Wi-Fi network and thermostat location, then complete the optional feature prompts. This preserves the equipment configuration your installer entered.
Set up a supported older model in Nest
For a Learning Thermostat (3rd gen) or Thermostat E, open the Nest app and select Settings > Add product. Scan the code on the back of the thermostat display and finish the Nest setup prompts. Then open Google Home using the same Google Account.
For an on-screen QR code, press the thermostat ring and open Settings > Nest app > QR code. Scan that code in the Nest app and complete setup. If your thermostat does not show the QR code option, use its entry key instead.
To get an entry key, press the thermostat ring and select Settings > Network to connect it to Wi-Fi. Next, open Settings > Nest app > Get Entry Key. You need physical access to the thermostat to read the displayed key.
In the Nest app, open Settings > Add product and tap Continue without scanning. Select your thermostat model and enter the key when requested. Complete setup, then open Google Home with the same Google Account.
Bring an existing Nest thermostat into Google Home
A Learning Thermostat (3rd gen) or Thermostat E already registered in Nest can link automatically when both apps use the same Google Account. Close Nest and Google Home completely, then reopen Google Home. Look for the thermostat in its assigned room or under Local devices.
An older, unmigrated Nest account needs migration before this linking can work. Migration replaces your Nest account sign-in with Google Account sign-in and cannot be reversed. In Nest, open Settings > Account > Migrate to a Google Account and read the migration information.
Select Continue with Google, choose the account you use in Google Home, and select Allow. Review household membership and the privacy and terms information, then tap Complete migration. If you accept a home invitation during migration, review the access changes and tap I agree.
Choose your email preferences, tap Next, then select Done. Reopen Google Home with that Google Account and look for the thermostat. Accounts created through Google sign-in do not need migration.
Refresh a thermostat that is already linked
For a thermostat that is already configured and linked, check the Google Account in your Google Home profile menu first. For a Nest app thermostat, it must match the Google Account used in Nest. Then open Home > All devices and swipe down to refresh.
This refresh helps Google Home discover devices that are already configured and linked. It does not register a thermostat for the first time. If you have not completed setup in the app required for your model, finish that setup before refreshing again.
Check phone connectivity when pairing fails
For pairing failures, connect your phone to the thermostat’s Wi-Fi network and turn on Bluetooth. Disconnect other Bluetooth accessories and temporarily turn off cellular data. On iPhone or iPad, also allow local-network access as described below. Reopen the setup app and retry QR scanning or manual code entry.
On compatible iPhones and iPads running iOS or iPadOS 14 onward, tap Allow when the local-network permission prompt appears. To change an earlier decision, open Settings > Privacy & Security > Local Network and enable access for Google Home or Nest, whichever app is performing setup.
Reconnect or reset a previously used thermostat
A Nest Thermostat (2020) with a disconnected account or a message saying an account must be added may need its stale Google Home registration removed. Removing it deletes that device registration from Google Home. Open the thermostat through Favorites or Devices > Climate, then select Settings > Remove device.
Start device setup again and select Already installed when offered. Complete the account and Wi-Fi prompts. This reconnection procedure applies to the Nest Thermostat (2020).
If you need to disconnect the account on a Nest Thermostat (2020) or Learning Thermostat (4th gen), this removes its account connection. On the thermostat, open Settings > Account > Disconnect. For a previously used device that you are preparing for setup, continue with the required factory reset.
A factory reset erases personal settings, and removing an existing app registration removes the device from that app. Remove an existing app registration before performing the full reset. On a Nest Thermostat (2020) or Learning Thermostat (4th gen), open Settings > Factory Reset and follow its prompts, then repeat Google Home setup.
On a Learning Thermostat (3rd gen) or Thermostat E, disconnecting the account removes its account connection, while a full reset erases personal settings. Open Settings > Reset and select Account connection; on an older model without that option, remove its existing app registration before choosing All Settings for a full reset. Then repeat setup in the Nest app and use the same Google Account in Google Home.
Frequently Asked Questions
How can someone else in the household access a thermostat already in Google Home?
An administrator selects the correct home, taps Add > Home Member, enters your email, taps Next, and chooses Admin or Member. For Admin, they tap Invite; for Member, they choose the Activity and Settings permissions, then tap Next and Invite. You open your profile menu, select Inbox, open the invitation, review access, and tap Agree & join. Membership provides access without pairing again, while adding or removing devices requires Admin access.
What should you do if the thermostat freezes during setup?
For a frozen Nest Thermostat that cannot restart through its menus, detach the display, remove both AAA batteries, reinstall them, and reattach the display. For a supported Learning Thermostat or Thermostat E in that condition, hold the thermostat down until the screen switches off, approximately 10 seconds, then press and release the ring to restart. Retry setup in the app required for your model.
Can a voice command refresh the thermostat connection?
On a configured voice-assistant speaker or display, say Hey Google, then say Sync my devices. This refreshes discovery for already configured and linked devices, including supported Nest thermostats.
Should you follow older instructions that use Works with Nest?
Works with Nest connections ended on September 29, 2023, so use the supported setup app for your thermostat model and migrate an older Nest account when needed. That retirement did not discontinue the Nest app itself.
Can Matter replace Google Home registration for the Nest Thermostat?
Google requires you to register the Nest Thermostat in Google Home before connecting it to a third-party platform through Matter. Complete its Google Home setup first.
How do you use Google Home with a managed Google Workspace account?
Ask your Workspace administrator to enable Google Home in the Admin console. Once access is enabled, sign in to Google Home with your Workspace account, create or join a home, and follow your thermostat’s normal setup method. Workspace accounts cannot join homes enrolled in Gemini for Home voice-assistant early access, and other feature restrictions also apply.