How to Turn On Developer Mode on an iPhone

Learn how to turn on developer mode on iPhone in Settings, finish activation after restarting, and reveal a missing switch with Mac pairing.

Contents

Don't Miss the Good Stuff

Get tech news that matters delivered to your inbox.

To turn on Developer Mode on your iPhone, open Settings > Privacy & Security > Developer Mode, turn on the switch, then restart and confirm activation with your device passcode. If the setting is missing, initiate pairing with a compatible Mac using Xcode, then return to the same Settings path.

The short version

  • Activation: Turn on Developer Mode in Privacy & Security, restart, then tap Enable and enter your passcode.
  • Missing switch: Initiate iPhone pairing with Xcode on a compatible Mac before returning to Settings.
  • Pairing options: Use a cable for initial pairing on versions earlier than iOS 27; wireless pairing requires iOS 27 or later.
  • Turning it off: Disable Developer Mode in Settings and restart your iPhone.

OptionWhat it doesWhen to use it
Settings activationEnables Developer Mode after restart and confirmationThe switch is visible
Wired Mac pairingReveals the setting through Xcode pairingThe switch is missing
Wireless Mac pairingPairs through Device Hub over Wi-FiYour iPhone runs iOS 27 or later
Apple Configurator installationInstalls a development-signed appYou have an appropriately signed .ipa file
Administrator pairing permissionAllows host pairing on a supervised iPhoneA management restriction prevents pairing
Settings deactivationTurns off Developer Mode with a restartYou want to disable it
Safety Check controlsDisables Developer Mode or removes a computer pairingYou want to review Device Hub access
Xcode downloadProvides the Mac software for pairingYou need Xcode on a compatible Mac
Apple Configurator downloadProvides the Mac app for the installation workflowYou need Apple Configurator on a compatible Mac

Turn on Developer Mode in Settings

Open Settings, select Privacy & Security, then find Developer Mode under Security. Open it and turn on Developer Mode. Tap Restart to continue activation.

After your iPhone restarts, swipe up and tap Enable. Enter your device passcode to finish turning on Developer Mode.

If the Developer Mode entry is missing, initiate Mac pairing using one of the routes below. Then return to Settings > Privacy & Security > Developer Mode and complete the activation sequence.

Reveal the missing switch with a cable

For wired pairing, you need a compatible Mac with Xcode 27 or later, which includes Device Hub, and an appropriate cable for your iPhone. If you need the Mac app, open Apple’s Xcode Resources page and follow Download Xcode from the Mac App Store. Use a cable for initial pairing on iPhone software earlier than iOS 27.

Connect your iPhone to the Mac with the cable. If your iPhone asks you to trust the computer, tap Trust. In Xcode on the Mac, choose Xcode > Open Developer Tool > Device Hub.

Select your iPhone in the sidebar, then click Pair when that button is shown. Return to your iPhone and open Settings > Privacy & Security > Developer Mode. Turn on the switch and tap Restart. After restarting, swipe up, tap Enable, and enter your device passcode.

Pair wirelessly on iOS 27 or later

The wireless pairing route requires iOS 27 or later and a compatible Mac with Xcode 27 or later, which includes Device Hub. Connect your iPhone and Mac to the same Wi-Fi network. In Xcode, open Xcode > Open Developer Tool > Device Hub.

Click Add Device (+), then choose Pair Nearby Device…. Choose the iPhone device type and follow the pairing instructions displayed on screen. If the Mac requests discovery permission, click Allow.

Select your iPhone and click Next, then enter the PIN displayed on your iPhone. When prompted on the phone, tap Trust. Complete the Developer Mode activation in Settings when requested, including the restart, swipe up, Enable confirmation, and device passcode.

Resolve pairing restrictions on a supervised iPhone

If your supervised iPhone cannot pair with the Mac, ask your administrator to review the allowHostPairing setting in the Restrictions payload. Apple says setting it to true permits host pairing. Setting it to false limits pairing to the supervision host, or blocks all pairing when no supervision-host certificate exists.

The administration menus depend on the management software your organization uses. Once pairing is permitted, complete the Mac pairing steps, then activate Developer Mode on your iPhone. Changing the pairing restriction does not itself enable Developer Mode.

Enable Developer Mode for a Configurator app

You can use Apple Configurator for Mac to install development-signed apps on compatible iPhones. This workflow requires the same Developer Mode activation in Settings. If you need the app, install the compatible Mac app from the official Apple Configurator product page.

In Apple Configurator, select your connected iPhone, then choose Actions > Add > Apps. Click Choose from my Mac and select the appropriately signed .ipa file. Click Add Apps to install it.

Complete activation through Settings > Privacy & Security > Developer Mode on your iPhone. If the switch is absent, initiate Mac pairing using Xcode, then return to Settings and finish activation.

Turn Developer Mode off again

To disable it, open Settings > Privacy & Security > Developer Mode. Turn off Developer Mode and restart your iPhone.

Review Device Hub access in Safety Check

To disable Developer Mode or remove an individual computer pairing through Safety Check, open Settings > Privacy & Security > Safety Check > Manage Sharing & Access. Tap Continue, then tap Skip where appropriate, repeating until you reach the Developer Mode screen.

Tap Disable Developer Mode to turn it off through Safety Check. If you only want to remove a particular computer pairing, tap the Info button beside that computer. Unpairing removes that computer’s pairing with your iPhone. Tap Unpair to complete the removal.

Frequently Asked Questions

When was Developer Mode introduced on iPhone?

Developer Mode was introduced in iOS 16. The confirmation wording differs on older releases, while Apple’s current activation steps use Enable.

Can you open Device Hub from Xcode’s run destination menu?

Yes, choose Manage Devices… from Xcode’s run destination menu. Then select your iPhone in the sidebar and click Pair if shown.

Can you add a development app without using Configurator’s Actions menu?

Yes, in Apple Configurator for Mac, choose Add > Apps from the toolbar or contextual menu. Click Choose from my Mac, select the appropriately signed .ipa file, then click Add Apps.

How do you enable Developer Mode again after turning it off?

Repeat the full activation procedure to enable it again. Turn on Developer Mode in Settings > Privacy & Security > Developer Mode, then tap Restart. After restarting, swipe up, tap Enable, and enter your device passcode.

Share