To turn off 5G on your iPhone, open Settings > Cellular > Cellular Data Options > Voice & Data, then select LTE. This setting keeps your phone configured for LTE. On a Dual SIM iPhone, choose the number you want to change before opening Voice & Data.
These steps apply to 5G-capable iPhones with your carrier’s network-mode options available. Menu labels and available options depend on your carrier and region. Choose LTE for a persistent change, since 5G Auto and power-saving features can still allow 5G.
The short version
- Direct setting: Select LTE under Voice & Data to keep 5G off.
- Dual SIM: Change each line separately if you want both lines configured for LTE.
- Automatic switching: 5G Auto can still use 5G.
- Power modes: Low Power Mode is temporary and has 5G exceptions on iPhone 12 and 13.
| Option | What it does | Main condition or limit |
|---|---|---|
| Select LTE | Keeps your phone configured for LTE | Carrier must expose the network-mode options |
| Dual SIM line settings | Selects LTE for an individual line | Repeat for both lines when needed |
| 5G Auto | Uses LTE when 5G would not noticeably improve performance | Requires a 5G plan and can still use 5G |
| Low Power Mode in Settings | Enables temporary power-saving behavior | Has 5G exceptions and changes other features |
| Low Power Mode in Control Center | Enables the same power mode quickly | Requires the control to be present on a Face ID iPhone |
| Siri | Enables Low Power Mode by voice | Requires Siri to be enabled and does not select LTE |
| Adaptive Power | Automatically enables Low Power Mode at approximately 20% battery | Supported models only, with a learning period |
| Voice Control | Operates the LTE settings with spoken commands | Must already be enabled and listening in a supported language |
| iPhone Mirroring | Lets you click the iPhone’s LTE setting from a Mac | Requires compatible devices and an existing setup |
Select LTE in your iPhone settings
Open Settings, tap Cellular, then choose Cellular Data Options. Open Voice & Data and select LTE. No download, installation, or update is required for this method.
If your menus use Mobile Data, follow Settings > Mobile Data > Mobile Data Options > Voice & Data > LTE. You are choosing the same network-mode setting under regional labels. Apple’s general 5G instructions cover iPhone 12 models and later, with available controls depending on your carrier and region.
Change each Dual SIM line separately
With Dual SIM, open Settings > Cellular and choose the number you want to change. Tap Voice & Data, then select LTE. In regions using the alternative label, start at Settings > Mobile Data.
The network-mode setting applies to the line you selected. Repeat the process for the other number if you want both lines configured for LTE.
Get help when the LTE setting is missing
If Voice & Data or LTE is missing, contact your carrier about the available options for your line. On a Dual SIM iPhone, make sure you have selected the number you intend to change before looking for its network-mode setting. If settings are restricted on a managed iPhone, ask your administrator for help.
Operate the LTE setting with Voice Control
With Voice Control already configured and listening in a supported language, you can operate the same settings through spoken commands. Open Settings, then say Tap Cellular. Next, say Tap Cellular Data Options, say Tap Voice & Data, and finally say Tap LTE.
For Dual SIM, select the relevant number before opening Voice & Data. When your phone uses localized menu labels, speak the corresponding onscreen labels instead. These exact-label commands do not require Apple Intelligence.
Change the setting from a Mac
If you already have iPhone Mirroring configured, keep your iPhone locked and nearby, then open iPhone Mirroring on your Mac. In the mirrored iPhone, click Settings > Cellular > Cellular Data Options > Voice & Data > LTE. For Dual SIM, choose the relevant line before opening Voice & Data.
This uses remote clicks to operate the same iPhone setting. You need iOS 18 or later, macOS Sequoia 15 or later, and a Mac with Apple silicon or a T2 chip. Both devices must use the same Apple Account with two-factor authentication and have Bluetooth and Wi-Fi enabled, and your iPhone must have a passcode. Apple says iPhone Mirroring is unavailable in the European Union.
Choose between LTE and automatic switching
Select 5G Auto if you want your iPhone to use LTE when 5G would not noticeably improve performance. Your phone can still use 5G in this mode. Keep LTE selected if you want 5G to stay off.
To allow automatic switching, open Settings > Cellular > Cellular Data Options > Voice & Data and select 5G Auto. On Dual SIM, select the relevant number first, then open Voice & Data. This option applies to 5G-capable iPhones with a 5G plan and the setting available.
Use Low Power Mode for temporary power saving
Low Power Mode offers temporary power saving, but it does not give you a persistent LTE selection. Apple says 5G can remain active for streaming and large downloads on iPhone 12 and 13. The mode also changes other features and turns off when charging reaches 80% or higher.
On iPhone 15 and later running current iPhone software, open Settings > Battery > Power Mode, then turn on Low Power Mode. On iPhone 14 and earlier running current iPhone software, open Settings > Battery and turn on Low Power Mode.
On a Face ID iPhone with the Low Power Mode control already present, swipe down from the top-right corner to open Control Center. Tap the battery icon to enable Low Power Mode. This activates the same temporary mode with the same 5G exceptions.
With Siri enabled, say Siri, turn on Low Power Mode. That request enables the power-saving mode with its temporary behavior and exceptions; it does not select LTE in Voice & Data.
Turn on Adaptive Power for automatic power saving
Adaptive Power can automatically activate Low Power Mode at approximately 20% battery. Apple says it needs at least seven days to learn your charging habits. It is an indirect, delayed option with the limitations of Low Power Mode, so choose LTE in your cellular settings for an immediate, persistent change.
Adaptive Power requires iOS 26 or later. Apple lists it as on by default on iPhone Duo, iPhone 18 Pro Max, iPhone 18 Pro, iPhone 17 Pro Max, iPhone 17 Pro, iPhone Air, iPhone 17, and iPhone 17e, and off by default on iPhone 16, 16 Plus, 16 Pro, 16 Pro Max, and 16e, and iPhone 15 Pro and Pro Max. On these models, open Settings > Battery > Power Mode, then turn on Adaptive Power if it is off.
Frequently Asked Questions
Does Low Data Mode turn off 5G?
No, Low Data Mode limits data activity rather than choosing the cellular radio generation. Select LTE under Voice & Data to switch from 5G to LTE.
Can turning off cellular access for an app make it use LTE?
Turning off an app’s cellular access makes that app use Wi-Fi only. It does not select LTE instead of 5G.
Will Airplane Mode or turning off Cellular Data switch my iPhone to LTE?
Neither Airplane Mode nor turning off Cellular Data accomplishes an LTE connection. To switch network modes, select LTE in Voice & Data.
Is turning off 5G Standalone enough to disable 5G?
Apple does not document turning off 5G Standalone alone as a way to disable all 5G. Select LTE under Voice & Data for that task.