To use Bluetooth headphones, put them into pairing mode and select their name in your phone or computer’s Bluetooth settings. The pairing controls depend on your headphone model, while the connection steps depend on your device. The Windows steps below use Windows 11 menus.
The short version
- Start with pairing mode: Use your model’s pairing button or case gesture to make the headphones discoverable.
- Connect your device: Turn on Bluetooth and select the headphones from the available devices.
- Choose the audio output: If you need to change where sound plays, select the connected headphones through the playback destination control on iPhone, Media output on Samsung Galaxy, or the Output section of Sound settings on Windows 11 or Mac.
- Check model features: Touch controls, companion apps, and connections to multiple devices depend on your headphones.
| Your device | Where to pair | What to select |
|---|---|---|
| iPhone or iPad | Settings > Bluetooth | Your headphones’ name |
| Android | Touch and hold Bluetooth in Quick Settings | Pair new device, then your headphones |
| Samsung Galaxy | Settings > Connections > Bluetooth | Your headphones, then Pair |
| Windows 11 | Taskbar Network, Sound, or Battery area, then Manage Bluetooth devices | Your headphones under New devices |
| Mac | Apple menu > System Settings > Bluetooth | Your headphones, then Connect |
| Chromebook | Select the time, then Bluetooth | + Pair new device, then your headphones |
Put your headphones into pairing mode
Use the pairing controls for your exact model, since button combinations and passcodes are model-specific. For Sony WH-1000XM6 headphones, charge them first; turning them on for the first time automatically starts pairing. To pair another device, hold the Bluetooth button for at least 5 seconds, then select WH-1000XM6 on that device. Enter 0000 only if those Sony headphones request a passkey.
For AirPods 4, AirPods 5, and AirPods Pro 3, leave the earbuds in their open case and double-tap the case front until the light flashes white. For AirPods 1 through 3 and AirPods Pro 1 and 2, leave the earbuds in their open case and hold the rear setup button until the light flashes white.
For Galaxy Buds3 and Buds3 Pro, place both earbuds in the case, close and reopen it, then hold the bottom Connect button for at least 3 seconds. For Buds2 and Buds2 Pro, hold both earbuds’ touchpads while they remain in the open case.
Connect to an iPhone or iPad
Open Settings > Bluetooth and turn on Bluetooth. With your headphones discoverable, tap their name and enter the manufacturer’s PIN or passcode if requested. Use your headphone model’s passcode rather than assuming every pair uses the Sony code above.
For AirPods or AirPods Pro with a compatible iPhone, display the Home Screen, open the case with the AirPods inside, and hold it near the phone. Tap Connect, complete the displayed instructions, then tap Done. Supported devices signed into the same Apple Account receive the setup automatically.
Apple lists iOS 18 or later for AirPods 4, iOS 26 or later for AirPods Pro 3, and iOS 27 for AirPods 5. For manual pairing, use your model’s case gesture or setup button, then open Settings > Bluetooth on your iPhone and select the AirPods.
Connect to an Android phone or tablet
Swipe down and touch and hold Bluetooth, then tap Pair new device. Select your discoverable headphones and complete the device-specific pairing prompt. When Pair new device is absent, check Available devices or open More > Refresh. Android menus vary by manufacturer, and some of Google’s instructions require Android 15 or later.
On a Samsung Galaxy phone or tablet, open Settings > Connections > Bluetooth. Select the headphones from the available devices, then tap Pair.
For Fast Pair-compatible headphones on Android 6.0 or later, enable Bluetooth and Location. Turn on the headphones and put them into pairing mode near the phone. Tap Connect in the notification, followed by Set up when additional setup is offered.
Pair with your computer
On Windows 11, select the taskbar Network, Sound, or Battery area. Open the Manage Bluetooth devices chevron beside Bluetooth, then select your discoverable headphones under New devices. Finish any device-specific prompts and select Done.
If your Windows PC lacks built-in Bluetooth, connect a compatible USB Bluetooth adapter to a USB port, then use Windows Bluetooth pairing. Match the adapter and its driver compatibility to your PC.
On a Mac, open Apple menu > System Settings > Bluetooth while the headphones are discoverable. Hover over their name and click Connect. Click Accept if requested.
On a Bluetooth-capable Chromebook, select the time, open Bluetooth, and enable it. Choose + Pair new device, then select your discoverable headphones. Check that they appear under Currently connected; for later reconnection, select them under Previously connected.
Send music and calls to the headphones
On iPhone, start playback in Music, Podcasts, or another audio app. Tap the Playback Destination button and select your headphones, then use the phone’s playback and volume controls. You can also select the playback destination from the Lock Screen or Control Center.
On Samsung Galaxy devices, connect your headphones, then open Quick Settings > Media output. Select the device you want to hear.
On Windows 11, open Start > Settings > System > Sound. Under Output, select your Bluetooth headphones. You can also choose the output through the taskbar Sound control.
On a Mac, open Apple menu > System Settings > Sound, select Output, and choose your compatible headphones. To use their microphone, select Input and choose the headset.
A calling app can have its own audio selections after Bluetooth pairing. In Google Meet on a supported desktop browser, open More options > Settings > Audio, then choose your headset for Microphone and Speakers. Select Test Speakers to check the output.
Use the controls and companion app
Headphone gestures depend on the model and can also depend on the connected app or device. While wearing Sony WH-1000XM6 headphones, double-tap the right touch panel to play or pause audio, or answer or end a call. Swipe forward or backward to change tracks and up or down to adjust volume.
With the WH-1000XM6 turned on, press NC/AMB to alternate between noise cancellation and Ambient Sound Mode by default; you can choose a different switching pattern for the button in Sony | Sound Connect. For supported Sony headphones, get Sony | Sound Connect through Sony’s App Store or Google Play links, connect the headphones, and follow the app’s setup flow. Supported functions include equalizer adjustments, noise controls, touch-control configuration, and firmware management. Older instructions naming Sony | Headphones Connect refer to the app’s previous name.
For supported Galaxy Buds on compatible Android devices, install Galaxy Wearable and open it. Tap Start, close the earbuds’ case for 5 to 6 seconds, then reopen it. Select the detected earbuds and tap OK. Check your model’s app requirements and allow the required permissions, including Nearby devices for Bluetooth discovery on Android 12 or later.
If a headphone app needs Bluetooth access on iPhone or iPad, open Settings > Privacy & Security > Bluetooth. Turn on access for the manufacturer’s app.
Reconnect or switch between devices
On Android, touch and hold Bluetooth in Quick Settings and select your headphones under Saved devices to reconnect. For a temporary disconnection, use See all if needed, open the Settings icon beside the headphones, and tap Disconnect. Previously paired Mac headphones can reconnect through Control Center > Bluetooth.
On Sony WH-1000XM6, hold the power button for at least 2 seconds to turn on the headphones and attempt reconnection to their last device. If they connect to the wrong nearby device, disable Bluetooth on that device and connect from your intended source. Other headphones have model-specific reconnection priorities.
For two simultaneous source connections on WH-1000XM6, pair the headphones separately with both devices. Connect them to the device running Sony | Sound Connect, enable Connect to 2 devices simultaneously in the app, then connect from the second device’s Bluetooth settings. This multipoint connection keeps two sources connected but does not mix two music streams.
On iPhone or iPad, the Bluetooth button in Control Center only temporarily disconnects accessories, with exceptions for certain Apple accessories and continuity features. It does not completely disable Bluetooth. To turn Bluetooth off fully, open Settings > Bluetooth and turn off Bluetooth.
Fix missing audio or a failed connection
When your headphones connect but remain silent, first check the playback output using the steps above. If only one Windows app is silent, check its app-specific output to help fix a headset that is not working. On Windows 11, open Start > Settings > System > Sound > Volume mixer. Under Apps, find the app, select the headphones as its Output device, and check that it is unmuted with its volume raised.
On a Mac, using a Bluetooth headset microphone can switch the connection to a lower-quality two-way audio mode. To restore music quality afterward, quit apps using that microphone and close Sound settings. If quality remains reduced, open Control Center > Sound, select the internal speakers, then select your headphones again.
Forgetting headphones on iPhone removes their pairing; forgetting AirPods also unpairs them from other devices using the same Apple Account. To pair again, open Settings > Bluetooth, tap the Info button beside the headphones, then tap Forget This Device and Forget Device. Put the headphones back into pairing mode and select them again.
Removing headphones from Windows removes their saved pairing. On Windows 11, open Start > Settings > Bluetooth & devices, then select More options beside the headphones and choose Remove device. Make the headphones discoverable again, select Add device, and choose them from the available Bluetooth devices.
Frequently Asked Questions
Can two people listen to the same iPhone with separate headphones?
On a supported iPhone or iPad, you can share audio with compatible AirPods or Beats. Connect and wear the first pair, open the playback destination control, and tap Share Audio. Bring the second pair nearby, put it into discovery mode if needed, then tap Share Audio and select it. Adjust each listener’s volume through the expanded volume control in Control Center.
How do you connect Bluetooth headphones directly to an Apple Watch?
Put your compatible headphones into pairing mode, then open Settings > Bluetooth on the watch and select them. AirPods already set up on your paired iPhone are also available to the watch.
Can you use Bluetooth headphones with Google TV?
Yes, you can connect one Bluetooth audio device at a time to Google TV. From the Home Screen, open your profile picture or initial, then Settings > Remote and accessories > Pair remote or accessory. Put your headphones into pairing mode, select them, and select Pair. To reconnect later, open Remote and accessories, choose the headphones, then select Connect.
Can Bluetooth headphones handle voice chat on Nintendo Switch 2?
You can listen through Bluetooth headphones on Nintendo Switch 2, but the console does not support Bluetooth microphones. Put your headphones into pairing mode, open HOME Menu > System Settings > Bluetooth Audio > Add Device, and select them. While using Bluetooth audio, you can connect at most two wireless controllers, and local wireless communication interrupts the audio.
Can you rename Bluetooth headphones on an iPhone?
Yes, you can rename supported accessories in Settings > Bluetooth. Tap the Info button beside your headphones, tap Name, enter the replacement name, then tap Done.