To replace toner in a Brother printer, keep it powered on and open your model's access cover. Follow the matching procedure below to clean the corona wire in the correct order, then keep the printer on with its cover closed until Ready Mode returns.
The short version
- Match your model: Monochrome printers, top-cover color printers, and color drum drawers use different replacement procedures.
- Keep the drum: Replace the depleted toner cartridge using your model's procedure below.
- Clean the corona wire: Move the green cleaning tab back and forth, then return it to its specified home position.
- Wait before reopening: Keep the printer powered on and its cover closed until Ready Mode returns.
Match your model to its replacement procedure
| Procedure or option | Models or eligibility | Main difference |
|---|---|---|
| Compact monochrome replacement | HL-L2400D, HL-L2405W, HL-L2420DW, HL-L2460DW, HL-L2460DWXL, HL-L2865DW | Front cover and removable toner-and-drum assembly |
| Monochrome multifunction family replacement | HL-L2465DW, DCP-L2640DW, DCP-L2647DW, HL-L2480DW, MFC-L2760DW, MFC-L2807DW, MFC-L2820DW, MFC-L2820DWXL, MFC-L2900DW, MFC-L2900DWXL, MFC-L2980DW | Front cover and green cartridge locking lever |
| Higher-volume monochrome replacement | HL-L5210DN, HL-L5210DW, HL-L5210DWT, HL-L5215DW, HL-L6210DW, HL-L6210DWT, HL-L6217DW, HL-L6310DW, HL-L6415DW, HL-L6415DWT | Front cover and removable toner-and-drum assembly |
| Top-cover color printer replacement | HL-L3220CDW, HL-L3240CDW, HL-L3280CDW, HL-L3295CDW | Remove the assembly for the indicated color |
| Top-cover color multifunction replacement | HL-L3300CDW, DCP-L3560CDW, MFC-L3720CDW, MFC-L3760CDW, MFC-L3765CDW, MFC-L3780CDW | Match the assembly to its color label |
| Newer color printer drawer replacement | HL-L8430CDW, HL-L8430CDWT, HL-L8570CDW | Lift cartridges out by their handles |
| Newer color multifunction drawer replacement | DCP-L8630CDW, MFC-L8730CDW, MFC-L8930CDW, MFC-L8970CDW, MFC-EX575 | Remove all cartridges to clean every corona wire |
| Older color drawer replacement | MFC-L8610CDW, MFC-L8895CDW, MFC-L8900CDW, MFC-L8905CDW | Push cartridges away to unlock, pull toward you to lock |
| Continue Mode with a physical button | HL-L2400D | Press Go seven times |
| Continue Mode with a single-line LCD | HL-L2405W, HL-L2420DW, HL-L2460DW, HL-L2460DWXL, HL-L2865DW | Select Replace Toner, then Continue |
| Continue Mode with a Menu button | HL-L2465DW, DCP-L2640DW, DCP-L2647DW, MFC-L2760DW | Start with Menu |
| Continue Mode with a touchscreen | HL-L2480DW, MFC-L2807DW, MFC-L2820DW, MFC-L2820DWXL, MFC-L2900DW, MFC-L2900DWXL, MFC-L2980DW | Start with Settings |
| Persistent toner warning | Listed monochrome families | Check the cartridge, reinstall it, and clean the corona wire |
| Receive and track Refresh toner | Compatible US laser printers with an active Refresh subscription | Keep the printer on and connected to Wi-Fi |
| Switch from Refresh to retail toner | US Refresh customers leaving the subscription | Obtain non-Refresh cartridges before cancellation |
Find your model in the table, then follow its physical replacement procedure below. For the older color drawer models, pay particular attention to the cartridge locking motion, which differs from the newer drawer procedure.
Replace toner in a monochrome Brother printer
The three monochrome replacement groups in the table use the same sequence. Leave the printer turned on, open the front cover, and pull out the combined toner cartridge and drum unit. Press down the green locking lever, then lift the old toner cartridge out of the drum.
Unpack the replacement cartridge and remove its protective cover. Hold it by the handle and gently shake it sideways several times. Insert it into the existing drum until it locks into place.
Slide the drum's green corona-wire cleaning tab back and forth several times. Return the tab to its home position, aligning its arrow with the arrow on the drum. Put the combined assembly back into the printer and close the front cover.
Keep the printer powered on while it returns to Ready Mode. Leave the front cover closed throughout that wait, and do not switch the printer off.
Replace toner in a color printer with a top cover
For the top-cover color printer and multifunction models listed in the table, leave the machine on and raise the top cover until it locks open. Internal components can be hot, so let them cool before touching them. Lift out the drum-and-toner assembly for the color identified on the LCD.
Press down the assembly's green locking lever and remove the old toner cartridge. Unpack the replacement, remove its protective materials, and insert it into the drum until it locks. Move the green corona-wire cleaning tab back and forth several times, then return it home with the arrows aligned.
Reinstall the assembly in the slot with the matching color label. Close the top cover and wait for Ready Mode. Keep the machine on and do not reopen the cover during that wait.
Replace toner in a newer color drum drawer
Use this procedure for the newer color printer and multifunction drawer groups in the table. Keep the machine on, press the front-cover release button, and open the front cover. Pull the drum drawer outward by its green-labeled handle until it reaches its stop.
Lift all toner cartridges out by their handles. Clean every corona wire by moving its green tab back and forth several times. Return each tab to its far-left home position and lock it there.
Unpack the replacement cartridge and remove its protective materials. Reinstall the cartridges, substituting the new cartridge for the depleted one and matching each cartridge to its color label. On the listed newer color printers, those labels are BK, C, M, and Y.
Push the drawer inward using the green-labeled handle until it is secured, then close the front cover. Keep the printer on with the cover closed until Ready Mode returns.
Replace toner in an older color drum drawer
The MFC-L8610CDW, MFC-L8895CDW, MFC-L8900CDW, and MFC-L8905CDW use an additional cartridge locking motion. Leave the machine on, press the front-cover release button, and open the cover. Pull the drum drawer outward to its stop using its green handle.
Hold each cartridge by its handle, gently push it away from you to unlock it, and then lift it out. Clean every corona wire by moving its green sliding tab back and forth. Return each tab to its locked home position at the far left.
Unpack the new cartridge and remove its protective cover. Put the cartridges back into their matching color positions, replacing the depleted cartridge with the new one. Gently pull each cartridge toward you until it locks into place.
Push the drawer back into the machine until it is secured, then close the front cover. Wait for Ready Mode without switching off the machine or reopening the cover. Use this push-to-unlock and pull-to-lock motion only for these four models.
Clear a toner warning after replacement
If Toner Low or Replace Toner remains on one of the listed monochrome models, first check that you replaced the toner cartridge rather than the drum. Use a brand-new, unused toner cartridge. Both the toner cartridge and drum must be installed.
Reinstall the cartridge using the monochrome procedure above, making sure it locks into the drum. Clean the corona wire with the green tab and return the tab to its home position before reinstalling the assembly. If the warning persists, contact Brother support.
Use Continue Mode to postpone replacement
On the specific monochrome models below, Continue Mode lets you postpone replacement until Toner Ended. It does not replenish toner, and output may become faint on the listed touchscreen models; print quality is no longer guaranteed on the listed single-line LCD models. Choose the control sequence that matches your printer.
On the HL-L2400D, keep the front cover closed and the power connected, then turn the printer on. Wait until only the Ready LED is illuminated, then press Go seven times to toggle Continue Mode. Repeat that sequence to toggle it off. This shortcut changes Continue Mode rather than resetting the toner counter.
On the HL-L2405W, HL-L2420DW, HL-L2460DW, HL-L2460DWXL, and HL-L2865DW, use the arrow buttons to select General Setup, then press OK. Select Replace Toner and press OK. Display Continue, then press Go.
To disable Continue Mode on those single-line LCD models, choose Stop instead. Brother says you cannot change the mode while the control panel or Status Monitor indicates an error.
On the HL-L2465DW, DCP-L2640DW, DCP-L2647DW, and MFC-L2760DW, press Menu, use the arrow buttons to display General Setup, and press OK. Display Replace Toner and press OK, then display Continue and press OK. Finish by pressing Stop/Exit. To disable the mode, choose Stop instead of Continue.
On the HL-L2480DW, MFC-L2807DW, MFC-L2820DW, MFC-L2820DWXL, MFC-L2900DW, MFC-L2900DWXL, and MFC-L2980DW, tap Settings > All Settings > General Setup > Replace Toner. Tap Continue, then tap the Home icon. To disable the mode, choose Stop instead of Continue.
Manage replacement toner with a Refresh subscription
For a compatible US laser printer enrolled in Brother Refresh EZ Print Subscription, keep the printer powered on and connected to Wi-Fi so Brother can monitor supplies and dispatch replacement cartridges automatically. To track a delivery, open Account Dashboard > Menu > Shipping Information, then click View Tracking. Install the supplied toner using the physical procedure for your model.
During an active subscription, installing a non-Refresh cartridge can stop printing, even if you replace only one color cartridge. If you are leaving Refresh, obtain the appropriate non-Refresh cartridges before canceling. Sign in only through Brother’s own app or website, and never share a code, password, or remote access with someone who contacts you.
Refresh cartridges stop functioning immediately when you cancel the subscription. To cancel, open Account Dashboard > Menu, select My Plans and Printers, and click Cancel. Follow the subsequent prompts, then install the non-Refresh cartridges using your model's physical replacement procedure.
Frequently Asked Questions
Can a cartridge from another printer clear a toner warning?
Brother says a partially used cartridge or one transferred from another machine may not reset toner status correctly on the listed monochrome families. Use a brand-new, unused cartridge when resolving a warning that remains after replacement.
How can you tell whether Continue Mode is enabled on the HL-L2400D?
After you toggle the mode, two flashes of all LEDs mean Continue Mode is enabled. One flash means it is disabled.
Will Continue Mode stay enabled after you install new toner?
Installing a new cartridge restores Stop on the HL-L2400D and the listed Menu-button and touchscreen models. On those models, you would need to enable Continue Mode again if you wanted to use it with the replacement cartridge.
Can you request bonus toner through Refresh?
Eligible US Mono Laser High/Power Plan customers can order bonus toner from Best for Business on the dashboard home screen. Your eligibility depends on your subscription plan.