How to Fix an Onn Roku TV That Won’t Connect to WiFi

If your Onn Roku TV won't connect to WiFi, check its password, restart the TV and router, then reset the saved network connection.

Contents

Don't Miss the Good Stuff

Get tech news that matters delivered to your inbox.

To fix an Onn Roku TV that won’t connect to Wi-Fi, reconnect with the correct password, restart the TV and router, then reset the saved network connection if needed. Start with the TV’s connection check to find out whether the failure involves your router or internet access. These steps apply to Onn TVs running Roku OS, with some options depending on your model.

The short version

  • Check the connection: Open Settings > Network > Check connection to separate a Wi-Fi problem from an internet problem.
  • Reconnect carefully: Choose your network and enter its case-sensitive password again.
  • Restart both devices: Restart the TV and router before changing advanced settings.
  • Reset only the network first: A network connection reset clears saved network information, so you must reconnect afterward.

Fix or checkWhen to use itKey condition
Connection checkStart hereReview network and internet results separately
Streaming app troubleshootingOnly one app failsThe TV passes its connection check
App removal and reinstallationAn app remains faultyActive Roku-billed subscriptions can prevent removal
Wireless setupThe password or network selection needs correctingPasswords are case-sensitive
Network rescanYour network is missingScan labels vary
Hidden network setupYour network name is hiddenEnter its name manually
TV system restartReconnecting failsThe menu path may omit Power
TV power disconnectionMenus are inaccessibleUnplug for at least 10 seconds
Router and modem restartThe network remains unreachableAllow startup to finish
Signal improvementsWi-Fi is weak or intermittentAdjust placement and reduce interference
Reduced network trafficA connected TV buffers or downloads slowlyPause competing downloads and streams
Router or coverage upgradePlacement and configuration changes failConsider persistent coverage or capacity limits
Network connection resetReconnecting and restarting failClears saved network information
Wi-Fi band changeThe current band remains unreliableBoth devices must support the alternative band
Router channel changeThe network remains missing or unreliableModel and regional limits apply
Hotspot testHome Wi-Fi still failsUse a compatible band and allow for mobile data use
Ethernet connectionYou need another connection optionThe TV needs a built-in Ethernet port
Online software updateTemporary internet access worksAllow installation and restart to finish
Update retryNetwork access works but updating failsCheck for a Roku service alert
USB software updateAn eligible TV remains offlineSome models require internet setup
Factory reset through settingsLess disruptive fixes failRemoves personal configuration
Hardware factory resetYou cannot reach the menusRequires the corresponding recessed Reset button
Recovery ModeRestart and reset failErases data and requires a compatible model
Onn supportFailures persist across compatible networksHave the TV model ready

Check where the connection fails

Press Home, then open Settings > Network > Check connection. Review the separate results for your network connection and internet access. For more connection information, open Settings > Network > About.

If the TV reaches your router but fails the internet check, open a website on another device using that same network. If that device also cannot get online, restart your router and modem using the steps below. Contact your internet provider if both devices still fail.

If the connection check passes but one streaming app fails, try another title and another app. Check the affected service’s website for an outage and verify your sign-in or subscription. To update the affected app, highlight it on the home screen, press Star, and select Check for Updates.

Removing an app removes it from your Roku TV. If the failure stays limited to that app, press Home, highlight it, press Star, and select Remove app, then confirm when prompted. An active Roku-billed subscription can prevent you from removing it; the steps to remove the affected Roku app apply to app problems after the TV is connected. To reinstall it, press Home, select Streaming Store, find the app, and select Add app.

Reconnect to the correct WiFi network

Press Home, then open Settings > Network > Set up connection > Wireless. Choose your network, enter its password, and select Connect. Match uppercase and lowercase letters exactly because the password is case-sensitive. During initial TV setup, select Wireless when prompted.

When your network is missing, select Scan again. Some network-selection screens call this Scan again to see all networks. Choose your network if it appears and retry the connection.

For a hidden network on Roku OS 15.0, select Private network and press OK. Enter the network name, supply its password, and select Connect. If the connection still fails, restart the TV and network equipment next.

Restart the TV and router

Press Home, then open Settings > System > Power > System restart and select Restart. If your TV has no Power menu, open Settings > System > System restart and select Restart. A normal press of Power is not equivalent to a system restart.

If you cannot use the menus, unplug the TV from electrical power for at least 10 seconds, then reconnect it. Retry Wi-Fi after the TV starts.

Next, disconnect power from your router and modem, or from your combined gateway. Wait 10 seconds, restore power, and let startup finish before retrying the TV. Run Check connection again to see whether the network and internet tests pass.

Improve a weak or unreliable signal

Move the router closer to the TV and place it higher, outside cabinets. Reduce obstructions between the devices and adjust the router’s antennas. Keep the router away from microwaves, cordless phones, and baby monitors.

Work through these placement changes to improve a weak Wi-Fi signal, then open Settings > Network > Check connection again. If coverage or capacity remains a problem after placement and configuration changes, evaluate a newer dual-band router or mesh system. If you replace the router, reconnect the TV to the replacement network.

If your TV connects but buffers or downloads slowly, pause large downloads and streaming on other devices, then retry. This reduces competing network traffic, but it will not correct a rejected Wi-Fi password.

Reset the saved network connection

A network connection reset clears your TV’s saved network information, so you will need to enter your Wi-Fi details again. Open Settings > System > Advanced system settings > Network connection reset. Select Reset connection and let the TV restart.

Return to Settings > Network > Set up connection > Wireless. Choose your network, enter its password, and select Connect. If it still fails, check the router’s band and channel before considering a full factory reset.

Check the router band and channel

If your router and Onn Roku TV both support 2.4 GHz and 5 GHz, try the other band through Settings > Network > Set up connection > Wireless. Choose the alternative network and reconnect. Support for 5 GHz depends on your Onn model.

Open Settings > Network > About and look at Wireless channel. In your router’s administration interface, change channel selection from automatic to manual.

For a 2.4 GHz network in North America, try channel 1, 6, or 11. For a compatible 5 GHz TV that cannot see its network, try a non-DFS channel from 36 through 48 or 149 through 165, subject to regional availability. DFS support varies by model, and supported devices require Roku OS 12.0 or later. Save your changes and restart the router as its manufacturer directs.

Test a hotspot or wired connection

Try another network or enable a phone hotspot using a Wi-Fi band compatible with your TV. On the TV, open Settings > Network > Set up connection > Wireless, choose the hotspot, enter its password, and select Connect. Streaming and software updates consume mobile data.

If the TV connects to the hotspot but not your home network, that points toward a home-network configuration or coverage problem. Failure across multiple compatible networks is a reason to request model-specific help from Onn.

If your Onn Roku TV has a built-in Ethernet port, connect an Ethernet cable between the TV and router. Open Settings > Network > Set up connection > Wired. This provides another connection test and a way to get online while troubleshooting Wi-Fi.

Update the TV software

With temporary internet access through a hotspot or Ethernet, press Home and open Settings > System > Software update. Select Check Now, then allow installation and the restart to finish. Some current menus use System update and Check now instead.

If the TV connects to the network but cannot finish updating, check Roku Support for a service alert, wait several minutes, and retry. An update failure is not necessarily a Wi-Fi failure. After a successful update, retry your home wireless connection.

An eligible offline Onn Roku TV can also update using USB. Roku’s procedure assumes activation was skipped, and some models require internet setup. On a computer, open https://tvupdate.roku.com/ with JavaScript enabled and enter your TV brand, Hardware ID, and Serial Number from Settings > System > About.

Select Download Software and copy update.roku to the root of a compatible USB drive with at least 256 MB of capacity. Insert the drive into the TV, open Settings > System > System update, and select I can’t connect. Enter the TV’s 12-digit code on the website, then enter the website’s six-digit code on the TV. Wait for installation and restart to finish.

Use a factory reset only as a last resort

A factory reset removes your personal configuration and requires you to reconnect and relink the TV. Open Settings > System > Advanced system settings > Factory reset > Factory reset everything. Enter the displayed code, select OK, and complete setup again.

A hardware reset also erases your TV’s configuration. If you cannot reach the menus and your Onn model has the corresponding recessed Reset button, use a straightened paperclip to hold it for approximately 12 seconds. Release it when the reset completes and the indicator becomes dim, then turn on the TV and complete setup.

Recovery Mode erases the TV’s data and reinstalls its software. On a recovery-capable Onn model, use it after an ordinary restart and reset fail, particularly for setup loops or failed software loading. Hold Reset for at least 20 seconds and release it when Recovery Mode appears. Choose a language, select Wireless, connect, and select Update now.

If Wi-Fi remains unavailable in Recovery Mode, follow Roku’s USB update procedure. If Recovery Mode does not appear after 30 seconds, contact Onn because support varies by model.

For persistent failures, record the TV model from Settings > System > About or the rear label. In Roku’s manufacturer-support directory, choose onn Roku TV support and request model-specific diagnosis or service. Seek that help when basic fixes and tests on other compatible networks fail.

Frequently Asked Questions

Can the Roku phone remote reconnect a completely disconnected TV?

The Roku phone remote cannot independently establish Wi-Fi on a completely disconnected TV. Your phone and TV must already be reachable on the same network. Manually entering the TV’s IP address in the app also cannot reconnect an offline TV.

Why does my TV become unavailable to AirPlay when it is off?

On models with Fast TV start, you can maintain network availability during standby by opening Settings > System > Power > Fast TV start, then checking Enable 'Fast TV Start'. This increases standby power consumption and does not correct an incorrect Wi-Fi password.

How do I connect to hotel or dorm WiFi?

On a Hotel & Dorm Connect-capable TV, open Settings > Network, choose the hotel network through wireless setup, and select I am at a hotel or college dorm. Follow the TV’s authentication instructions using a phone or computer browser; select Try again if authentication expires. If your TV exposes the option, open Settings > System > Advanced system settings, select Enable ‘Device connect’, and retry. Roku’s support instructions specify an activated device.

What if Recovery Mode rejects a password with special symbols?

Some affected Roku TVs reject passwords containing special symbols specifically in Recovery Mode. Use a compatible mobile hotspot to retry recovery. This does not mean normal Roku Wi-Fi setup rejects passwords containing symbols.

Could MAC address filtering stop my TV from connecting?

Yes, a network that restricts devices by MAC address may need your TV added to its filter configuration. Highlight Scan again or Scan again to see all networks on the wireless-selection screen to display the TV’s MAC address. Give that address to your router administrator, since approval steps depend on the router.

Could an IPv6 network cause a connection problem?

Roku identifies some hardware as IPv4-only, so compatibility depends on your TV’s Roku hardware model. Open Settings > System > About and ask your router administrator or internet provider to compare the model with Roku’s dual-stack compatibility list. If your hardware is IPv4-only, that limitation points to providing IPv4 connectivity as the appropriate next check.

Share