To fix a Kindle Scribe pen that is not working, remove any magnetic third-party case, select Pen in the notebook toolbar, and try writing again. If it remains unresponsive, refresh the page, restart the Scribe, and replace a worn or damaged nib. If the problem affects only one document, the Premium Pen shortcut, or the eraser, use the matching checks below.
The short version
- Start with simple checks: Remove a third-party magnetic case and select Pen instead of Pointer in a notebook.
- Refresh the content: Switch writing tools, turn the page and return, or close and reopen the affected content.
- Check the tip: Replace a worn or damaged nib, including when the pen writes while hovering.
- Match the symptom: Document restrictions, shortcut assignments, and eraser operation need different checks.
- Escalate persistent faults: Restart and update the Scribe, then request Amazon’s assessment if the pen still fails.
| Check or option | When it applies | What to do |
|---|---|---|
| Magnetic case | Writing fails with a third-party case attached | Remove the case and retry |
| Writing tool | The pen navigates a notebook | Select Pen |
| Tool switch | A writing tool stops responding | Select another writing tool |
| Page refresh | Writing stops on a page | Turn away and return |
| Reopen content | A book, notebook, or sticky note stops responding | Close and reopen it |
| Writing toolbar | Tools are hidden in a book or document | Select Show Writing Toolbar |
| Annotation surface | Writing in supported books or documents | Choose a canvas or sticky note |
| Annotation menu | Highlighted text shows no annotation actions | Enable Annotation Menu |
| PDF import | A PDF opens but rejects handwriting | Resend the original with Send to Kindle |
| Sticky note location | A note cannot be inserted | Try another location or document |
| Note saving | A note disappears after writing | Finish saving the note |
| Replacement nib | The tip is worn, damaged, or writes while hovering | Fit a replacement nib |
| Shortcut assignment | The Premium Pen button behaves unexpectedly | Check Shortcut button settings |
| Shortcut compatibility | A shortcut fails in particular content | Check the content’s writing toolbar |
| Physical eraser | The Premium Pen eraser does not erase | Check eraser pressure and contact |
| Sleep and wake | Notes are frozen or inaccessible | Press Power, then press it again |
| Normal restart | The pen remains unresponsive | Open the power menu and select Restart |
| Forced restart | The Scribe is unresponsive | Hold Power for 40 seconds |
| Automatic update | The Scribe needs current software | Connect to Wi-Fi |
| Firmware download | Preparing a manual update | Choose the exact Scribe model |
| Manual update | Installing firmware with a computer | Transfer and install the correct update |
| Mac USB utility | Transferring files from a Mac | Open USB File Manager |
| Mac utility download | The transfer utility is needed | Get Send to Kindle for Mac |
| Sync between Scribes | Writing is missing on another Scribe | Sync both devices |
| Companion app refresh | Notebook edits are missing in the app | Sync the Scribe and refresh the notebook |
| Factory reset | Considering a last resort for general troubleshooting | Back up and sync before resetting |
| Hardware assessment | The fault persists or existed out of the box | Contact Amazon for assessment |
Remove the case and check the writing tool
Remove your third-party case, especially if it contains magnets, and try writing again. This check applies to both Basic and Premium Pens across the Kindle Scribe family.
In a notebook, select Pen in the writing toolbar. The Pointer tool makes the stylus navigate instead of write, so movement without ink can be a tool-selection issue. Double-tap Pen to access its options.
Refresh the page and restart the Scribe
Select another writing tool in the toolbar and retry on content that supports handwriting. If that does not help, turn to another page and then return. Next, close and reopen the affected book, notebook, or sticky note.
For frozen or inaccessible notes, press Power once to put the Scribe to sleep, then press Power again to wake it. If the pen remains unresponsive, hold Power until the power menu opens, then select Restart.
When the Scribe itself is unresponsive, hold Power for 40 seconds, continuing even if a power dialog appears or the screen goes blank. Release Power and wait for the device to reboot. Try writing again before moving on.
Check where the document allows handwriting
If the problem affects a book or personal document, check its annotation controls. To restore a hidden toolbar, tap the top of the page, open the 3-dot menu, and select Show Writing Toolbar.
In a book or personal document supporting Active Canvas, select Active Canvas in the writing toolbar, then press and hold between lines of text. Where sticky notes are supported, select the sticky note tool and touch the page, or tap highlighted text and select Note. Active Canvas does not support right-to-left or vertical writing systems.
If tapping highlighted or underlined text does not show the expected actions, open the top navigation bar and select Aa > More. Turn on Annotation Menu, then try the text again. This restores annotation controls; it does not repair pen hardware.
A PDF that opens normally but rejects handwriting may need to be imported again. Amazon does not support handwriting in PDFs copied through USB-C or sent to the library before November 11, 2022. Resend the original PDF using Amazon’s Send to Kindle service, then open that library copy.
EPUB comics, manga, and children’s books also have handwriting restrictions. If writing fails only in those files, the content restriction may explain the problem. Continue with the nib checks if the pen also fails in a notebook with Pen selected.
Replace a worn or damaged nib
Replace the nib if its tip is worn or damaged, or if the pen writes while hovering above the screen. These instructions apply to Scribe pens with replaceable nibs.
Use the supplied replacement tool to withdraw the old nib. Push a replacement nib into the opening until it is seated, then try writing again. If the fault persists after replacement, request a hardware assessment from Amazon.
Check the Premium Pen shortcut and eraser
If writing works but the shortcut button does not, check its assigned tool. From Home, swipe down and select All Settings > Pen settings > Shortcut button. Choose a tool under Shortcut tools.
Hold the shortcut button while the nib touches the display. The assigned tool must also be available for the content you have open, so check that content’s writing toolbar. These shortcut instructions apply to Premium Pens with a shortcut button.
The physical eraser removes the handwritten strokes you rub over. To use it, turn the Premium Pen around, press its eraser end firmly against the screen, and rub over the strokes you want to erase. These eraser instructions apply to the Premium Pen.
Update the Scribe software
Connect the Scribe to Wi-Fi so Kindle software updates can download and install automatically. For a manual update, open Amazon’s Kindle software download page and locate your exact model.
Amazon lists separate categories for the 2022 Scribe, 2024 Scribe, third-generation Scribe, Scribe without Front Light, and Scribe Colorsoft. Under your model’s category, select Download Software Update. Do not substitute another model’s package.
Install an update with a computer
After downloading the correct update, turn on the Scribe and connect it to your computer by USB. Copy the update onto the Kindle drive. Eject the Kindle to disconnect it, then unplug the cable.
Amazon gives the manual-update path as Home > Menu > Settings > Menu > Update Your Kindle, although the update-menu placement can vary with firmware. Select OK to install the update. After the automatic restart, leave the device charging overnight for indexing.
If your firmware uses a different update-menu placement, use the Wi-Fi automatic-update method above. If the pen remains faulty after updating, request Amazon’s hardware assessment.
If you need a USB transfer utility on a Mac, download it from the Send to Kindle for Mac page by expanding Send to Kindle app for Mac and selecting Get Send to Kindle for Mac. Amazon lists macOS 12 or later and Intel or M1 through M3 Macs for this utility.
Install Send to Kindle for Mac, connect the Scribe by USB, and open the app. Select Tools > USB File Manager, or, after signing in, select Open USB File Manager. Amazon documents this utility for drag-and-drop transfers to the Kindle’s Documents folder, while its manual-update steps place the update file on the Kindle drive itself, so use the Wi-Fi automatic-update method above if you cannot copy the update there.
Consider a factory reset only as a last resort
A factory reset is an optional last resort for general Kindle troubleshooting. Amazon’s pen troubleshooting checklist does not prescribe it, so you can proceed to hardware assessment without resetting.
A factory reset removes personal data, downloads, and unsynced content and deregisters the Scribe, so back up and sync your content first. To follow the steps to reset your Kindle, start from Home, swipe down, and open Settings or All Settings, then select Device Options > Factory Reset. Select Yes, and register the device again afterward.
Ask Amazon to assess a persistent fault
Contact Amazon for a hardware assessment if replacing the nib does not resolve the problem or the pen was faulty out of the box. From Amazon’s Scribe pen troubleshooting page, select Contact Us to start the support process.
Frequently Asked Questions
Why can’t I place a sticky note on the page?
Select the sticky note tool and place the note away from images, margins, and existing notes or canvases. If insertion still fails, try another location or another document.
Why does a handwritten note disappear after I close it?
For an Active Canvas, select the checkmark icon in the translucent box to finish saving. For a sticky note, write something before closing it because blank notes are not saved.
How do I get handwritten notes onto another Kindle Scribe?
Connect both Scribes to the internet and keep both devices updated. On each device, open Quick Actions and select Sync, then reopen the affected note.
What should I do when notebook edits are missing from the Kindle app?
Connect both the Scribe and the phone running the Kindle app to the internet. On the Scribe, open Quick Actions and select Sync, then refresh or reopen the notebook in the Kindle app.