Water damage on iPhone is everything but pleasant experience. First, you need to dry your iPhone 4 carefully. Next step is to turn it on, and when you do, it may seem like everything works fine. However, you can notice that your device is searching for service, and that you cannot call or receive calls, send or receive messages, etc. There are 5 ways to fix iPhone 4 searching for service after water damage which are considered as useful. All five are listed below.
See also: 5 Ways To Fix No Sound On IPhone 4
5 ways to fix iPhone 4 searching for service after water damage
Solution No.1: Turn Airplane mode on/off.
Maybe this is your way your. Go to Settings, turn Airplane mode, and after several seconds, turn if off again.
Solution No.2: Turn Wi-Fi on.
After water damage, when you see there is no service, you don’t think about turning on Wi-Fi. For some users, turning it on was the solution which solved the problem. Try it out.
Solution No.3: Remove the SIM card.
It is crucial to dry your device properly, and to check the area where the SIM card is placed. Remove the SIM card, clear and dry the area, and along the way, check if there are any damages on the SIM card, because if there is, you will have to replace it.
Solution No.4: Check Date & Time on your phone.
Drying out your device after the water damage is something you must do. During that task, you probably removed the battery, which changed the time and date on your phone. If that is the issue, go to Settings, tap on Date & Time, and set it correctly.
Solution No.5: Reset network settings.
This reset will remove saved Wi-Fi password and other existing settings, but you will add them again in minutes. To do this, go to Settings > General > Reset > Reset Network Settings.
At least one of 5 ways to fix iPhone 4 searching for service after water damage should be useful to you.