Product

Technobezz is supported by its audience. We may get a commission from retail offers.

SABRENT PCIe 3.0 x4 Card with 10GbE drops to $224.99

Save $75 on this record-low Sabrent PCIe card with three M.2 NVMe slots and 10GbE, perfect for NAS or compact builds.

T

Technobezz

Senior Editor

Aug 5, 2026
5 min read
Technobezz
SABRENT PCIe 3.0 x4 Card with 10GbE drops to $224.99

Get Deals Like These in Your Inbox

The best prices, reviewed weekly.

SABRENT PCIe 3.0 x4 Card, 10GbE + price drops to $224.99

Down $75 from the usual price.

Three M.2 NVMe slots and a 10GbE port on a single PCIe card is an uncommon pairing, and SABRENT's EC-PM2L delivers both without demanding UEFI bifurcation support. For anyone building a NAS, a homelab, or a compact workstation short on expansion slots, that combination is exactly the kind of space-saver that solves real problems. The SABRENT PCIe 3.0 x4 Card, 10GbE + drops to $224.99 - save $75, beating the previous record low of $245.99 and undercutting the 30-day average of $260.15. If you have been weighing a storage and networking upgrade. This is the cheapest this card has ever been on Amazon.

THE DEAL

SABRENT PCIe 3.0 x4 Card, 10GbE +

SABRENT PCIe 3.0 x4 Card, 10GbE +

$224.99 (was $299.99) - Save $75 (25% off)

WhereAmazon

ExpiresNo end date listed

Get This Price

For just $224.99, down from its list price of $299.99, this sits below the $255.72 average of the last 90 days and the $252.82 average of the last six months. The card has spent most of its life closer to $260, so a sub-$225 tag is a genuine outlier.

This is a record low that likely will not hang around.

What You're Getting

  • Three M.2 NVMe slots handling 2230 to 2280 drives, PCIe Gen 2.0 through 5.0, with support for drives up to at least 8TB per slot.
  • Integrated Marvell-based 10GbE port, backward compatible down to 100Mbps with CAT 5e or better cabling.
  • No bifurcation required: install into any physical x4 or larger slot with no PCIe lane splitting or UEFI tweaks.
  • Tool-free aluminum heatsink with thermal padding keeps drives cool under sustained load.
  • PCIe 3.0 x4 total bandwidth, with each M.2 slot running up to x2 for balanced storage and network throughput.

Who This Is For

This card fits anyone who needs fast mass storage and wired networking without giving up motherboard slots. A NAS builder or homelab tinkerer gets three drive bays plus 10GbE in one slot, which is ideal for small chassis where every PCIe lane counts.

It also suits a creator who wants a big NVMe pool beside a high-speed network link.

The Caveat

Bandwidth is shared across the card's x4 interface, so each M.2 slot tops out at PCIe 3.0 x2. For sustained heavy writes to a single drive, a dedicated x4 adapter will run faster, but for typical storage pools and 10GbE workloads the trade-off rarely shows.

Final Verdict

At a new all-time low, the EC-PM2L is a smart pull for anyone consolidating storage and networking into one slot. Grab it now if a NAS or homelab build is on your list, because prices this far under the average tend to snap back.

Share this article