Your Pixel 10 Pro Pro XL is dead. The screen is black, and nothing you do seems to wake it up. Let's fix that.
Most phones in this situation just need a hard reset or a proper charge cycle to get going again. Here are the specific fixes for the Pixel 10 Pro XL that I've found work best, ordered from the quickest check to the deeper dive.
Start with a Force Restart
This is the first thing you should try. A system crash or a deep software freeze can make your phone appear completely dead, but the hardware is usually fine.
Press and hold the Volume up and Power buttons at the same time for a full 10 seconds. You'll feel a vibration, and the phone should restart. Release the buttons as soon as you see the Google logo.
This is a hardware-level reset, not a factory reset. It won't delete any of your data. I've seen this fix a surprising number of Pixel 10 Pro XL units that looked completely bricked.
Check if the Battery is Completely Dead
The phone might have drained to zero and now it's too low to even show the charging indicator. Plug it into a 30W+ USB-C PPS charger with the included cable.
Leave it alone for at least 15 minutes. A dead Pixel battery needs a few minutes of steady charging before it can power the display. If you see a battery icon after 15 minutes, you're back in business.
Important for the Pixel 10 Pro XL: remove any thick phone case before charging. The phone is known to overheat and shut off while charging, especially with cases trapping heat. A naked phone charges much more reliably.
Test Wireless Charging
If the wired charging port is acting up, try wireless charging instead. The Pixel 10 Pro XL supports Qi2 wireless charging at up to 25W. Place the phone on a compatible charging pad.
Here's the trick: the charging coil on this model is very picky about positioning. You need to center the phone almost perfectly on the pad. If it's off by even a centimeter, it might not start charging or could register and then stop. After setting it down, wait 30 seconds to see if the charging indicator lights up.
A successful wireless charge that eventually brings the phone back to life strongly suggests your USB-C port might have a defect or debris in it, which is a known issue on some units.
Try a Different Charger and Cable
Not all chargers are created equal. The Pixel 10 Pro XL charges fastest with a USB-C PPS (Programmable Power Supply) charger. Some older USB-A to USB-C cables won't deliver enough power to wake a deeply drained battery.
Use the cable that came in the box if you still have it, or any high-quality USB-C to USB-C cable rated for 60W or more. Plug it into a wall block that supports at least 30W output. Avoid computer USB ports for the initial charge, they usually put out far too little power.
Is a Third-Party App Causing the Issue?
Sometimes an app crashes so hard on boot that it drags the whole system down with it. Safe mode lets you bypass those apps entirely.
To start in safe mode, press and hold the power button until the power off menu appears. Then, press and hold the "Power off" option on the screen until you see a prompt asking if you want to reboot in safe mode. Confirm it. Your phone will restart, and you'll see "Safe mode" at the bottom of the screen.
If the phone works fine in safe mode, a third-party app is the culprit. Start uninstalling suspicious apps, especially any you added just before the issue started, and reboot normally. You'll find the culprit eventually.
Access Recovery Mode
If the phone turns on but gets stuck on the Google logo, you'll need to access recovery mode. This boots a separate system partition that can help fix software issues without a full wipe.
Press and hold the Volume down and Power buttons simultaneously. When you see the menu with "Start" and other options, release the buttons. Use the Volume keys to navigate to the recovery mode option, then press the Power button to select it.
Once in recovery mode, you'll see an Android bot lying down. This is normal. Press and hold the power button, then quickly tap the volume up button once. You'll see the full recovery menu. From here, you can try wiping the cache partition to fix corrupted system files.
Factory Reset via Recovery
If nothing else has worked and your phone won't boot normally, a factory reset from recovery mode is your strongest software-level fix. This will erase everything on your phone. Your photos, contacts, messages, and apps will be gone unless you have a backup in Google Photos or Drive.
From the recovery menu, use the volume keys to highlight "Wipe data/factory reset" and press the power button to confirm. The process takes about a minute. When it's done, select "Reboot system now."
The phone will restart fresh. If it boots up and you can set it up normally, your hardware is almost certainly fine, and it was a software corruption issue all along.
When the Charging Port Itself is the Problem
There's a known issue with some Pixel 10 Pro XL units where the USB-C port is defective. If your phone shows no signs of life on a charger, but you feel it get warm in the same spot on the back during wireless charging, the port might be the problem.
Check the port with a flashlight. Look for any lint, pocket debris, or bent pins inside. A quick clean with a non-conductive object (like a wooden toothpick) can dislodge compacted dirt. Gently scrape the bottom of the port to pull out any dust. Don't use a metal tool, as you can short out the pins.
If cleaning doesn't fix it and the phone still won't charge via cable, the port likely needs a replacement. A repair shop can swap it out fairly quickly. In the meantime, stick with Qi2 wireless charging to keep the phone running.