Android Wi-Fi Scanning Stuck: How to Fix It

Android devices are known for their versatility, user-friendly interface, and cutting-edge features. However, some users may encounter issues with their Wi-Fi connection, particularly when it gets stuck on scanning. This problem can be frustrating and can prevent users from accessing the internet, which is why it's important to address it as soon as possible.

When your Android device gets stuck on Wi-Fi scanning, it means that it is unable to detect any available networks in the area. This can happen for various reasons, such as a software glitch, outdated firmware, or a problem with the Wi-Fi module. Fortunately, there are several solutions that you can try to fix this issue and restore your internet connection.

Android Wi-Fi Scanning Stuck: Symptoms and Causes

Android Wi-Fi scanning stuck is a common issue that many Android device users face. When the Wi-Fi scanning is stuck, the device cannot connect to any network, and the Wi-Fi icon disappears from the status bar. This issue can be frustrating, especially when you need to use the internet urgently.

The following are some of the symptoms of Android Wi-Fi scanning stuck:

• The Wi-Fi icon disappears from the status bar
• The device cannot connect to any Wi-Fi network
• The Wi-Fi scanning is stuck on "scanning" or "obtaining IP address"
• The device shows a notification that says "Wi-Fi is not in range" even when it is in range

There are several causes of Android Wi-Fi scanning stuck. The most common causes include:

• Network issues: When the device cannot connect to the network due to issues such as poor signal strength, incorrect password, or incorrect network settings, the Wi-Fi scanning may get stuck.
• Router issues: When the router is not working correctly, the device may not be able to connect to the network, and the Wi-Fi scanning may get stuck.
• Battery issues: When the device battery is low, it may not be able to connect to the network, and the Wi-Fi scanning may get stuck.
• Wi-Fi scanning throttling: In Android 8 and later versions, the Wi-Fi scanning may get throttled due to the new Wi-Fi scanning restrictions. This can cause the Wi-Fi scanning to get stuck, and the device may not be able to connect to the network.
• Permissions: If the device does not have the necessary permissions to access the Wi-Fi network, the Wi-Fi scanning may get stuck.

To fix the Android Wi-Fi scanning stuck issue, you can try the following solutions:

• Check the network settings and ensure that the device is connected to the correct network.
• Restart the router and the device and try to connect to the network again.
• Turn off the device's Wi-Fi and turn it back on again.
• Check the battery level and charge the device if necessary.
• Check the Wi-Fi scanning restrictions and disable them if necessary.
• Check the permissions and ensure that the device has the necessary permissions to access the Wi-Fi network.

In conclusion, Android Wi-Fi scanning stuck can be a frustrating issue, but it can be fixed by following the above solutions. If the issue persists, you may need to seek further assistance from a professional.

How to Fix Android Wi-Fi Scanning Stuck Issue

If you're facing an issue with your Android device where the Wi-Fi scanning is stuck, you're not alone. This issue can be frustrating, but there are a few troubleshooting tips you can try to fix the issue.

Troubleshooting Tips

Check Wi-Fi Settings

The first step is to check your Wi-Fi settings. Make sure that your Wi-Fi is turned on and that you're connected to a network. If you're not connected to a network, try connecting to one and see if that helps.

Restart Your Device

Sometimes, all it takes to fix the issue is to restart your device. This can help reset any settings that may be causing the issue.

Forget Wi-Fi Network and Reconnect

If restarting your device doesn't work, try forgetting the Wi-Fi network and reconnecting. To do this, go to your Wi-Fi settings, find the network you're trying to connect to, and select "Forget." Then, try reconnecting to the network.

Reset Network Settings

If none of the above troubleshooting tips work, you can try resetting your network settings. This will reset all your network settings, including Wi-Fi, mobile data, and Bluetooth. To do this, go to your device's settings, select "System," then "Reset options," and finally "Reset Wi-Fi, mobile, and Bluetooth."

Check Password and IP Address

If you're still having issues, check the password for the network you're trying to connect to. Make sure that you're entering the correct password. Additionally, check your device's IP address to make sure it's not causing any issues.

Check Notifications

Finally, check your device's notifications to see if there are any issues with the Wi-Fi connection. Sometimes, you may receive a notification that there's an issue with the Wi-Fi network you're trying to connect to. If this is the case, follow the instructions in the notification to fix the issue.

By following these troubleshooting tips, you should be able to fix the Android Wi-Fi scanning stuck issue. If none of these tips work, you may need to contact your device manufacturer for further assistance.

Conclusion

While Wi-Fi scanning issues can be frustrating, there are steps you can take to try and resolve them. By following the options outlined in this article, you can hopefully get your Wi-Fi scanning back up and running smoothly.